I guess the bsd.rd would not have your root disk's /etc/hostname.le0 as root for your bsd.rd is on rd0a. Does that file on your root disk, sd0a have media specified? Perhaps you need to issue ifconfig le0 media <????> at bsd.rd?
Sent from my iPhone On Jul 4, 2012, at 2:17 AM, "Sebastian Reitenbach" <sebas...@l00-bugdead-prods.de> wrote: > Hi, > > just tried to install from the fresh 5.2-beta bsd.rd, but it doesn't get an IP address via DHCP. > It seems to have a problem to detect the link on the le0 interface. > Booting back with the 5.1-current, normal bsd GENERIC, it just works. > see both dmesgs below. > > Rebooting with command: disk bsd.rd > Boot device: /iommu/sbus/espdma@5,8400000/esp@5,8800000/sd@3,0 File and args: bsd.rd >>> OpenBSD BOOT 2.6 > Booting bsd.rd > Loading at physical address 400000 > 3329948+409020=0x390ea0 > console is ttya > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2012 OpenBSD. All rights reserved. http://www.OpenBSD.org > > OpenBSD 5.2-beta (RAMDISK) #9: Wed Jun 27 18:30:54 MDT 2012 > dera...@sparc.openbsd.org:/usr/src/sys/arch/sparc/compile/RAMDISK > real mem = 200937472 (191MB) > avail mem = 193236992 (184MB) > mainbus0 at root: SUNW,SPARCstation-5 > cpu0 at mainbus0: MB86907 @ 170 MHz, on-chip FPU > cpu0: 16K instruction (32 b/l), 16K data (32 b/l), 512K external (32 b/l) DVMA coherent cache enabled > obio0 at mainbus0 > clock0 at obio0 addr 0x71200000: mk48t08 (eeprom) > timer0 at obio0 addr 0x71d00000 delay constant 82 > zs0 at obio0 addr 0x71100000 pri 12, softpri 6 > zstty0 at zs0 channel 0: console > zstty1 at zs0 channel 1 > zs1 at obio0 addr 0x71000000 pri 12, softpri 6 > zskbd0 at zs1 channel 0: no keyboard > zstty2 at zs1 channel 1: mouse > slavioconfig at obio0 addr 0x71800000 not configured > auxreg0 at obio0 addr 0x71900000 > power0 at obio0 addr 0x71910000 > fdc0 at obio0 addr 0x71400000 pri 11, softpri 4: chip 82077 > iommu0 at mainbus0 addr 0x10000000: version 0x5/0x0, page-size 4096, range 64MB > sbus0 at iommu0: 21.250 MHz > dma0 at sbus0 slot 5 offset 0x8400000: rev 2 > esp0 at dma0 offset 0x8800000 pri 4: ESP200, 40MHz > scsibus0 at esp0: 8 targets, initiator 7 > cd0 at scsibus0 targ 2 lun 0: <MATSHITA, CD-ROM CR-504, ST23> SCSI2 5/cdrom removable > sd0 at scsibus0 targ 3 lun 0: <IBM, DCAS32160SUN2.1G, S60B> SCSI2 0/direct fixed serial.IBM_DCAS32160SUN2.1GF2583160_ > sd0: 2063MB, 512 bytes/sector, 4226725 sectors > "SUNW,bpp" at sbus0 slot 5 offset 0xc800000 not configured > ledma0 at sbus0 slot 5 offset 0x8400010: rev 2 > le0 at ledma0 offset 0x8c00000 pri 6: address 08:00:20:89:d9:b5 > le0: 16 receive buffers, 4 transmit buffers > "SUNW,CS4231" at sbus0 class serial slot 4 offset 0xc000000 not configured > "power-management" at sbus0 slot 4 offset 0xa000000 not configured > cgsix0 at sbus0 slot 3 offset 0x0 pri 9: SUNW,501-2325, 1152x900, rev 11 > wsdisplay0 at cgsix0 > wsdisplay0: screen 0 added (std, sun emulation) > bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@3,0 > root on rd0a swap on rd0b dump on rd0b > erase ^?, werase ^W, kill ^U, intr ^C, status ^T > > Welcome to the OpenBSD/sparc 5.2 installation program. > (I)nstall, (U)pgrade or (S)hell? i > At any prompt except password prompts you can escape to a shell by > typing '!'. Default answers are shown in []'s and are selected by > pressing RETURN. You can exit this program at any time by pressing > Control-C, but this can leave your system in an inconsistent state. > > Terminal type? [sun] > System hostname? (short form, e.g. 'foo') warbird > > Available network interfaces are: le0. > Which one do you wish to configure? (or 'done') [le0] > IPv4 address for le0? (or 'dhcp' or 'none') [dhcp] > Issuing hostname-associated DHCP request for le0. > le0: no link ............. sleeping > Issuing free-roaming DHCP request for le0. > le0: no link ............. sleeping > Available network interfaces are: le0. > Which one do you wish to configure? (or 'done') [le0] > >>> OpenBSD BOOT 2.6 > Booting bsd > Loading at physical address 400000 > 3237020+481972 [52+150528+132973]=0x3d1468 > [ using 283928 bytes of bsd ELF symbol table ] > console is ttya > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2012 OpenBSD. All rights reserved. http://www.OpenBSD.org > > uvm_km_kmem_grow: grown to 0xfe000000 > OpenBSD 5.1-current (GENERIC) #62: Sun May 27 12:05:06 MDT 2012 > dera...@sparc.openbsd.org:/usr/src/sys/arch/sparc/compile/GENERIC > real mem = 200933376 (191MB) > avail mem = 192966656 (184MB) > mainbus0 at root: SUNW,SPARCstation-5 > cpu0 at mainbus0: MB86907 @ 170 MHz, on-chip FPU > cpu0: 16K instruction (32 b/l), 16K data (32 b/l), 512K external (32 b/l) DVMA coherent cache enabled > obio0 at mainbus0 > clock0 at obio0 addr 0x71200000: mk48t08 (eeprom) > timer0 at obio0 addr 0x71d00000 delay constant 82 > zs0 at obio0 addr 0x71100000 pri 12, softpri 6 > zstty0 at zs0 channel 0: console > zstty1 at zs0 channel 1 > zs1 at obio0 addr 0x71000000 pri 12, softpri 6 > zskbd0 at zs1 channel 0: no keyboard > zsms0 at zs1 channel 1 > wsmouse0 at zsms0 mux 0 > slavioconfig at obio0 addr 0x71800000 not configured > auxreg0 at obio0 addr 0x71900000 > power0 at obio0 addr 0x71910000 > fdc0 at obio0 addr 0x71400000 pri 11, softpri 4: chip 82077 > iommu0 at mainbus0 addr 0x10000000: version 0x5/0x0, page-size 4096, range 64MB > sbus0 at iommu0: 21.250 MHz > dma0 at sbus0 slot 5 offset 0x8400000: rev 2 > esp0 at dma0 offset 0x8800000 pri 4: ESP200, 40MHz > scsibus0 at esp0: 8 targets, initiator 7 > cd0 at scsibus0 targ 2 lun 0: <MATSHITA, CD-ROM CR-504, ST23> SCSI2 5/cdrom removable > sd0 at scsibus0 targ 3 lun 0: <IBM, DCAS32160SUN2.1G, S60B> SCSI2 0/direct fixed serial.IBM_DCAS32160SUN2.1GF2583160_ > sd0: 2063MB, 512 bytes/sector, 4226725 sectors > bpp0 at sbus0 slot 5 offset 0xc800000: DMA2 > ledma0 at sbus0 slot 5 offset 0x8400010: rev 2 > le0 at ledma0 offset 0x8c00000 pri 6: address 08:00:20:89:d9:b5 > le0: 16 receive buffers, 4 transmit buffers > audiocs0 at sbus0 slot 4 offset 0xc000000 pri 9 > audio0 at audiocs0 > "power-management" at sbus0 slot 4 offset 0xa000000 not configured > cgsix0 at sbus0 slot 3 offset 0x0 pri 9: SUNW,501-2325, 1152x900, rev 11 > wsdisplay0 at cgsix0 mux 1 > wsdisplay0: screen 0 added (std, sun emulation) > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > scsibus2 at softraid0: 256 targets > bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@3,0 > root on sd0a (767d44393957fabc.a) swap on sd0b dump on sd0b > Automatic boot in progress: starting file system checks. > /dev/sd0a (767d44393957fabc.a): file system is clean; not checking > /dev/sd0e (767d44393957fabc.e): file system is clean; not checking > /dev/sd0d (767d44393957fabc.d): file system is clean; not checking > setting tty flags > pf enabled > starting network > DHCPREQUEST on le0 to 255.255.255.255 port 67 > DHCPACK from 10.0.0.27 (00:00:24:c9:d4:98) > bound to 10.0.0.25 -- renewal in 21600 seconds. > starting early daemons: syslogd pflogd ntpd. > starting RPC daemons:. > savecore: no core dump > ...
