On 04/12/12 15:07, Mark Kettenis wrote:
Date: Tue, 04 Dec 2012 09:09:13 -0430
From: Marco Plaut <mpl...@comware.com.ve>
Good evening,
I'm quite new to OpenBSD. I've managed to get 5.2 installed and running
on softraid on an Oracle M5000.
I'd like to be pointed on the right direction to get a pair of QLogic
ISP2432 HBA to work, some info:
Sun SPARC Enterprise M5000 Server, using Domain console
Copyright 2010 Sun Microsystems, Inc. All rights reserved.
Copyright 2010 Sun Microsystems, Inc. and Fujitsu Limited. All rights
reserved.
OpenBoot 4.24.13, 32768 MB memory installed, Serial #86538722.
Ethernet address 0:21:28:28:79:e2, Host ID: 852879e2.
...
...
XSCF> console -d 0
Connect to DomainID 0?[y|n] :y
Boot device: svm-root File and args:
OpenBSD IEEE 1275 Bootblock 1.3
..>> OpenBSD BOOT 1.4
Trying bsd...
Booting /pci@0,600000/pci@0/pci@8/pci@0/scsi@1/disk@0,0:a/bsd
6605424@0x1000000+5520@0x164ca70+173400@0x1800000+4020904@0x182a558
symbols @ 0xfd76c2c0 81+405456+255993 start=0x1000000
[ using 662248 bytes of bsd ELF symbol table ]
console is /pseudo-console
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2012 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 5.2 (GENERIC.MP) #236: Mon Jul 30 16:38:18 MDT 2012
dera...@sparc64.openbsd.org:/usr/src/sys/arch/sparc64/compile/GENERIC.MP
real mem = 34359738368 (32768MB)
avail mem = 33799159808 (32233MB)...
...
...
isp0 at pci8 dev 0 function 0 "QLogic ISP2432" rev 0x03: ivec 0x94
isp0: Polled Mailbox Command (0x8) Timeout (100000us)
isp0: Mailbox Command 'ABOUT FIRMWARE' failed (TIMEOUT)
pyro3 at mainbus0: "Oberon", rev 0, ign c0, bus B 2 to 255
pyro3: dvma map c0000000-ffffffff
pci9 at pyro3
isp1 at pci9 dev 0 function 0 "QLogic ISP2432" rev 0x03: ivec 0xd4
isp1: Polled Mailbox Command (0x8) Timeout (100000us)
isp1: Mailbox Command 'ABOUT FIRMWARE' failed (TIMEOUT)
...
...
Thx in advice!
Unfortunately support for the ISP2432 was never finished, so you won't
have any luck with OpenBSD until somebody does do the work :(.
I think you're the first person to actually run OpenBSD on an M5000.
Would you minds sending your full dmesg to dm...@openbsd.org, or to me
personally (kette...@openbsd.org)?
dmesg sent to that list and you.
Damn! That's terribly bad since I SERIOUSLY need it!
As we speak I'm checking out the CURRENT kernel (and reading a lot!),
can someone point me on how to fix this Qlogic issue? Kernel driver
development HOWTO?
By the way, I can do tests on that M5000 but is nowhere close to my
office, I do have a T2000 (32 CPU, 32GB) in my office for my
"play/joy/do as I please" with a quite similar QLogic card (pciX, not pciE)
Thx in advance!
