Hi,
I found out that the ROM image from internet was faulty
so I installed Solaris 10 into VirtualBox on OS X Mountain Lion
and extracted new ROM from xvr10-DVI_console-040512.tar.Z
DOS command "flashrom -i" showed that the card had 128k and
the flashing succeeded. Sun Ultra 45's OBP recognised the card
and so did OpenBSD (radeonfb).
However, both SUN and HP monitors show odd pattern
(like I was looking thru cotton fabric, like a mummy)
which I could not get rid off. The pattern is on
both on analog (HD15) and digital channel (DVI).
I can change DVI console resolution from OBP so I tried:
r1280x1024x60
r1280x1024x75 => no picture at all
r1024x768x60
but the pattern remained.
Starting X in OpenBSD works; I can see the fvwm windows
but the sick-sack pattern makes the text unreadable.
To be continued...
-pekka-
On 6/30/13 1:12 PM, Tobias Ulmer wrote:
On Sat, Jun 29, 2013 at 11:09:00AM +0300, pekka wrote:
Hi,
has anybody managed to reflash
ATI Radeon 7000 64MB PCI (not MAC version!)
into XVR-100?
I tried flashrom with firmware 1.61 as
explained in forums.nekochan.net but
obdiag in OBP does not see the card.
-pekka-
Interesting... No. This is what a real one looks like:
Domain /dev/pci3:
0:2:0: ATI Radeon VE
0x0000: Vendor ID: 1002 Product ID: 5159
0x0004: Command: 0286 Status: 02b0
0x0008: Class: 03 Subclass: 00 Interface: 00 Revision: 00
0x000c: BIST: 00 Header Type: 00 Latency Timer: 84 Cache Line Size: 10
0x0010: BAR mem prefetchable 32bit addr: 0x08000000/0x08000000
0x0014: BAR io addr: 0x00000300/0x0100
0x0018: BAR mem 32bit addr: 0x00100000/0x00010000
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 1002 Product ID: 0908
0x0030: Expansion ROM Base Address: 00120001
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 08 Max Lat: 00
0x0050: Capability 0x01: Power Management
