Hi, I've installed 6.1 on an Ultra 45 with an xvr-300 graphics card. The install went fine but on reboot I can read the boot messages up until a certain point then the screen flashes and the text is unreadable. The displayed text starts at the in the middle of the screen and wraps from the left. I can just make out the login prompt but the console is unusable. I can ssh in ok. I've checked the /etc/ttys and the first two entries are terminal type sun. I started X with startx and X starts but the xterm text is a mess and I can't read it. Also the background Xs look squished. I read /usr/X11R6/README and set up an xorg.conf as per the instructions but it made no difference. I checked the firmware and the radeon firmware is in the directory. The monitor is an IBM/Lenovo L170p , it's preferred mode is 1284x1024@60hz.. xrandr -q confirms that.
I've booted Solaris 10 on the machine and Xsun works fine. The card has a one dual link DVI port (DVI-59?) then a splitter cable for two monitors. The monitor is connected to the cable marked "1" I'm not sure what to do next, so any help appreciated. Glenn.
