apparently everything is in the right place:
-rw-r--r-- 1 root bin 2048 Oct 16 14:40 /etc/firmware/radeon/R300_cp.bin
elios# pkg_info
radeondrm-firmware-20170119 firmware binary images for radeondrm(4) driver
On 10/25/18 9:21 PM, Jonathan Gray wrote:
On Thu, Oct 25, 2018 at 08:23:29PM -0700, Veraldi Riccardo wrote:
Hello,
I just installed OpenBSD 6.4 on my Ultra 45.
right before completing the boot process and right before showing the login
prompt the VGA console does a reset, the screen becomes black and when it
appears again the character size is so tiny you can barely see it and the
text console is kind of replicated 6 times in a row on the same screen. I
would post a picture but I think it's not allowed. I can blindly log in as
root on the console and launching startx opens X11 which works, anyway the
terminal console is really unusable like this.
Is there a way that I can fix this issue ?
on 6.3 this did not happen.
these are the most significant messages from dmesg they could be related to
the problem:
radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
error: [drm:pid0:r100_cp_init] *ERROR* Failed to load firmware!
Is /etc/firmware/radeon/R300_cp.bin missing?
radeondrm-firmware package not installed?
drm:pid0:r300_startup *ERROR* failed initializing CP (-2).
drm:pid0:r300_init *ERROR* Disabling GPU acceleration
Can't enable IRQ/MSI because no handler is installed
Can't enable IRQ/MSI because no handler is installed
Can't enable IRQ/MSI because no handler is installed
radeondrm0: 1280x1024, 8bpp
wsdisplay0 at radeondrm0 mux 1: console (std, sun emulation), using wskbd0
thank you
Rick
