Tested with install71.iso 27-Mar-2022: same result (handwritten from
screenphoto)
{1} ok boot cdrom
Boot device: /pci@1e,600000/pci@0/pci@1/pci@0/ide@1f/cdrom@1,0:f File
and args:
Can't read disk label.
Can't open disk label package
Can't open boot device
--------------------------------------------------------------------
/usr/src/sys/arch/sparc64/compile/GENERIC.MP
Architecture: OpenBSD.sparc64
Machine : sparc64
dmesg:
OpenBSD 7.0 (GENERIC.MP) #1: Sat Mar 26 00:02:21 EET 2022
real mem = 8589934592 (8192MB)
avail mem = 8422752256 (8032MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root: Sun Ultra 45 Workstation
cpu0 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1600 MHz
cpu0: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K
external (64 b/l)
cpu1 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1600 MHz
cpu1: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K
external (64 b/l)
"memory-controller" at mainbus0 not configured
"memory-controller" at mainbus0 not configured
pyro0 at mainbus0: "Fire", rev 3, ign 780, bus A 2 to 12
pyro0: dvma map c0000000-ffffffff
pci0 at pyro0
ppb0 at pci0 dev 0 function 0 "PLX PEX 8532" rev 0xaa
pci1 at ppb0 bus 3
ppb1 at pci1 dev 1 function 0 "PLX PEX 8532" rev 0xaa
pci2 at ppb1 bus 4
ppb2 at pci2 dev 0 function 0 "Acer Labs M5249" rev 0x00
pci3 at ppb2 bus 5
ohci0 at pci3 dev 28 function 0 "Acer Labs M5237 USB" rev 0x03: ivec
0x780, version 1.0, legacy support
ohci1 at pci3 dev 28 function 1 "Acer Labs M5237 USB" rev 0x03: ivec
0x780, version 1.0, legacy support
ohci2 at pci3 dev 28 function 2 "Acer Labs M5237 USB" rev 0x03: ivec
0x780, version 1.0, legacy support
ehci0 at pci3 dev 28 function 3 "Acer Labs M5239 USB2" rev 0x01: ivec 0x781
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Acer Labs EHCI root hub" rev
2.00/1.00 addr 1
auacer0 at pci3 dev 29 function 0 "Acer Labs M5455 Audio" rev 0x21: ivec
0x785
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auacer0
alipm0 at pci3 dev 30 function 1 "Acer Labs M7101 Power" rev 0x00: can't
map i/o space
pciide0 at pci3 dev 31 function 0 "Acer Labs M5229 IDE" rev 0xc8: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 0x784 for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-845S, D100> removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Acer Labs OHCI root hub" rev
1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Acer Labs OHCI root hub" rev
1.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Acer Labs OHCI root hub" rev
1.00/1.00 addr 1
ppb3 at pci1 dev 2 function 0 "PLX PEX 8532" rev 0xaa
pci4 at ppb3 bus 6
ppb4 at pci4 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb3
pci5 at ppb4 bus 7
bge0 at pci5 dev 4 function 0 "Broadcom BCM5715" rev 0xa2, BCM5715 A1
(0x9001): ivec 0x796, address 00:14:4f:1f:58:ca
brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
bge1 at pci5 dev 4 function 1 "Broadcom BCM5715" rev 0xa2, BCM5715 A1
(0x9001): ivec 0x797, address 00:14:4f:1f:58:cb
brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
ppb5 at pci1 dev 3 function 0 "PLX PEX 8532" rev 0xaa: msi
pci6 at ppb5 bus 8
ppb6 at pci1 dev 8 function 0 "PLX PEX 8532" rev 0xaa: msi
pci7 at ppb6 bus 9
ppb7 at pci1 dev 9 function 0 "PLX PEX 8532" rev 0xaa
pci8 at ppb7 bus 10
ppb8 at pci8 dev 0 function 0 "Intel 41210 PCIE-PCIX" rev 0x09
pci9 at ppb8 bus 11
mpi0 at pci9 dev 1 function 0 "Symbios Logic SAS1064" rev 0x02: msi
mpi0: SAS1064, firmware 1.8.3.0
scsibus2 at mpi0: 63 targets
sd0 at scsibus2 targ 0 lun 0: <ATA, ST1000DM010-2EP1, CC43>
naa.5000c500d06ae6f7
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
sd1 at scsibus2 targ 1 lun 0: <ATA, ST2000DM008-2FR1, 0001>
naa.5000c500c6d8877a
sd1: 1907729MB, 512 bytes/sector, 3907029168 sectors
ppb9 at pci8 dev 0 function 2 "Intel 41210 PCIE-PCIX" rev 0x09
pci10 at ppb9 bus 12
radeondrm0 at pci10 dev 2 function 0 "ATI Radeon VE" rev 0x00
drm0 at radeondrm0
radeondrm0: ivec 0x790
pyro1 at mainbus0: "Fire", rev 3, ign 7c0, bus B 2 to 255
pyro1: dvma map c0000000-ffffffff
pci11 at pyro1
ebus0 at mainbus0
"flashprom" at ebus0 addr 0-1fffff not configured
rtc0 at ebus0 addr 100000-10000f: bq4802
com0 at ebus0 addr 80-87 ivec 0x7c8: ns16550a, 16 byte fifo
com1 at ebus0 addr 0-7 ivec 0x7c8: ns16550a, 16 byte fifo
"env-monitor" at ebus0 addr 0-41 not configured
pcfiic0 at ebus0 addr 80-81 ivec 0x7c1
iic0 at pcfiic0
"pca9556" at iic0 addr 0x18 not configured
lmtemp0 at iic0 addr 0x2b: lm76
lmtemp1 at iic0 addr 0x48: lm76, fails to respond
lmtemp2 at iic0 addr 0x4f: lm76
"adt7462" at iic0 addr 0x58 not configured
power0 at ebus0 addr e0-e1 ivec 0x7c3
"i2c" at mainbus0 not configured
"i2c" at mainbus0 not configured
"i2c" at mainbus0 not configured
"ppm" at mainbus0 not configured
dt: 445 probes
uhub4 at uhub0 port 7 configuration 1 interface 0 "Standard Microsystems
product 0x2502" rev 2.00/0.01 addr 2
uhidev0 at uhub2 port 1 configuration 1 interface 0 "Fujitsu Component
Type 6 Keyboard" rev 1.10/2.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 7
wskbd0 at ukbd0: console keyboard
uhidev1 at uhub2 port 2 configuration 1 interface 0 "Raptor Gaming
PS/2+USB Mouse" rev 1.10/51.15 addr 3
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
bootpath: /pci@1e,600000/pci@0,0/pci@9,0/pci@0,0/scsi@1,0/disk@0,0
root on sd0a (90c99853e0818176.a) swap on sd0b dump on sd0b
radeondrm0: RV100
BIOS signature incorrect 0 0
[drm] *ERROR* radeon: ring test failed (scratch(0x15E4)=0xCAFEDEAD)
[drm] *ERROR* radeon: cp isn't working (-22).
drm:pid0:r100_startup *ERROR* failed initializing CP (-22).
drm:pid0:r100_init *ERROR* Disabling GPU acceleration
radeondrm0: 1280x1024, 8bpp
wsdisplay0 at radeondrm0 mux 1: console (std, sun emulation), using wskbd0
Bogus possible_clones: [ENCODER:45:TMDS-45] possible_clones=0x6 (full
encoder mask=0x7)
Bogus possible_clones: [ENCODER:46:TV-46] possible_clones=0x5 (full
encoder mask=0x7)
Bogus possible_clones: [ENCODER:48:DAC-48] possible_clones=0x3 (full
encoder mask=0x7)
usbdevs:
Controller /dev/usb0:
addr 01: 10b9:0000 Acer Labs, EHCI root hub
high speed, self powered, config 1, rev 1.00
driver: uhub0
addr 02: 0424:2502 Standard Microsystems, product 0x2502
high speed, self powered, config 1, rev 0.01
driver: uhub4
Controller /dev/usb1:
addr 01: 10b9:0000 Acer Labs, OHCI root hub
full speed, self powered, config 1, rev 1.00
driver: uhub1
Controller /dev/usb2:
addr 01: 10b9:0000 Acer Labs, OHCI root hub
full speed, self powered, config 1, rev 1.00
driver: uhub2
addr 02: 0430:0005 Fujitsu Component, Type 6 Keyboard
low speed, power 100 mA, config 1, rev 2.00
driver: uhidev0
addr 03: 1267:0213 Raptor Gaming, PS/2+USB Mouse
low speed, power 100 mA, config 1, rev 51.15
driver: uhidev1
Controller /dev/usb3:
addr 01: 10b9:0000 Acer Labs, OHCI root hub
full speed, self powered, config 1, rev 1.00
driver: uhub3
--------------------------------------------------------------------
On 27.3.2022 0.19, Theo de Raadt wrote:
We believe this problem is fixed in -current, and will be fixed in 7.1
Therefore would appreciate if you test the snapshot.
Pekka Niiranen <pekka.niira...@pp5.inet.fi> wrote:
I can confirm this problem:
The Sun Ultra 45 boots from v6.8 CD fine, but not from v7.0 CD
(install70.iso or cd70.iso)
Can't read disk label.
I was able to install only from USB disk.
- Pekka -
On 1.2.2022 15.42, David Savolainen wrote:
Sparc64 7.0 full install CD (install70.iso) does not boot on my Sun
V240. This includes the original release and the 1/31 snapshot.
Here is the output when attempting to boot from the 1/31 snapshot:
Boot device: /pci@1e,600000/ide@d/cdrom@0,0:f File and args:
OpenBSD IEEE 1275 Bootblock 2.1
..>> OpenBSD BOOT 1.22
Can't read disk label.
Can't open disk label package
Trying bsd...
Booting /pci@1e,600000/ide@d/cdrom@0,0:f/bsd
4130216@0x1000000+6744@0x13f05a8+3236812@0x1c00000+957492@0x1f163cc
OF_map_phys(3fe44000,8192,fed58000,-1) failed
no space for symbol table
Program terminated
{1} ok
The last OpenBSD to run on this machine is 6.6
David Savolainen
