Hi Claudio,
* Claudio Jeker <cje...@diehard.n-r-g.com>:
> On Wed, Jan 08, 2025 at 10:02:42AM +0000, Abu Hussain Al Mukhtar wrote:
> > Hi All,
> >
> > I am having trouble generating an usable logical domain configuration on a
> > Sunfire T2000 (UltraSPARC T1 chip).
> >
> > Has someone had success in generating an ldom configuration using a 7.6
> > release?
> > If so, I would like to take a look at your config, and maybe share what
> > your OBP
> > Firmware version is?
> >
> > I have tried so far:
> >
> > 1.- Explicitly setting (a pretty generous amount, i.e. >4GB) RAM to the
> > primary, as
> > mentioned by Mark Kettenis in a previous thread;
> > 2.- Quoting and unquoting the ldom names - If I unquote them, the boot
> > process hangs
> > completely, never even reaching OpenFirmware's 'ok' prompt. If I quote
> > them, I
> > experience the same errors mentioned in another thread ("Unknown
> > hypervisor option...")
> > 3.- Even resetting the service processor after changing LDOM configuration.
> >
> > Any hints greatly appreciated!
> >
>
> Could you share your ldom.conf file?
Here it is!
domain "primary" {
vcpu 4
memory 4G
}
domain "www" {
vcpu 6
memory 4G
vdisk "/home/admin/uat-config/vdisk1"
vnet
}
> Btw. you must reset / restart the system after changing the LDOM
I did, as documented in the manual.
> configuration.
>
> --
> :wq Claudio
>
Thanks! BR
