Hi there,
I read that some people do manage to boot a 2.4-test kernel
Personally I am getting paranoid about what I might be doing wrong
since none of the latest 2.3-pre and 2.4-test gets me past mounting
/proc
Maybe someone could kindly put a 2.4-test kernel + modules available
somewhere so I can see at least if it boots further than that for me?
I include serial console boot sequence for reference.
Thanks!
-- Marc Duponcheel.
[work] [EMAIL PROTECTED]
[home] [EMAIL PROTECTED]
Restarting system.
Resetting ...
SPARCstation 5, No Keyboard
ROM Rev. 2.24, 96 MB memory installed, Serial #8161928.
Ethernet address 8:0:20:7c:8a:88, Host ID: 807c8a88.
Boot device: /iommu/sbus/espdma@5,8400000/esp@5,8800000/sd@3,0 File and args:
SILO boot:
2.2 2.4
boot: 2.4
PROMLIB: obio_ranges 1
bootmem_init: Scan sp_banks, init_bootmem(spfn[1b1],bpfn[1b1],epfn[9fac])
free_bootmem: base[0] size[4000000]
free_bootmem: base[8000000] size[1fac000]
reserve_bootmem: base[0] size[1b1000]
reserve_bootmem: base[1b1000] size[13f8]
init_bootmem: return end_pfn[9fac]
Booting Linux...
mem_init: Calling free_all_bootmem().
PROMLIB: Sun Boot Prom Version 3 Revision 2
Linux version 2.4.0-test3 (root@marc-sparc) (gcc version 2.95.2 19991024 (release)) #1
Tue Jul 11 19:01:55 MEST 2000
ARCH: SUN4M
TYPE: SPARCstation 5
Ethernet address: 8:0:20:7c:8a:88
Boot time fixup v1.6. 4/Mar/98 Jakub Jelinek ([EMAIL PROTECTED]). Patching kernel for
srmmu[Fujitsu Swift]/iommu
On node 0 totalpages: 40876
zone(0): 40876 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Found CPU 0 <node=ffd3c19c,mid=1131639905>
Found 1 CPU prom device tree node(s).
Power off control detected.
Kernel command line: root=/dev/sda1 ro
Calibrating delay loop... 109.77 BogoMIPS
Memory: 92304k available (1100k kernel code, 308k data, 112k init) [f0000000,09fac000]
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
VFS: Diskquotas version dquot_6.4.0 initialized
POSIX conformance testing by UNIFIX
IOMMU: impl 0 vers 4 page table at f05c0000 of size 262144 bytes
sbus0: Clock 22.0 MHz
dma0: Revision 2
dma1: Revision 2
ioremap: done with statics, switching to malloc
dma2: ESC Revision 1
Linux NET4.0 for Linux 2.3
Based upon Swansea University Computer Society NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
Linux IP multicast router 0.06 plus PIM-SM
Starting kswapd v1.6
pty: 256 Unix98 ptys configured
esp0: IRQ 36 SCSI ID 7 Clk 40MHz CCYC=25000 CCF=8 TOut 167 NCR53C9XF(espfast)
esp1: IRQ 53 SCSI ID 7 Clk 40MHz CCYC=25000 CCF=8 TOut 167 NCR53C9XF(espfast)
ESP: Total of 2 ESP hosts found, 2 actually in use.
scsi0 : Sparc ESP100A-FAST
scsi1 : Sparc ESP236-FAST
scsi : 2 hosts.
Vendor: QUANTUM Model: FB1080J SUN1.05 Rev: 630D
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 3, lun 0
Vendor: SEAGATE Model: ST11200N SUN1.05 Rev: 9500
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi1, channel 0, id 0, lun 0
Vendor: SEAGATE Model: ST11200N SUN1.05 Rev: 9500
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdc at scsi1, channel 0, id 1, lun 0
Vendor: SEAGATE Model: ST11200N SUN1.05 Rev: 9500
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdd at scsi1, channel 0, id 2, lun 0
Vendor: SEAGATE Model: ST11200N SUN1.05 Rev: 9500
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sde at scsi1, channel 0, id 5, lun 0
scsi : detected 5 SCSI disks total.
esp0: target 3 [period 100ns offset 8 10.00MHz FAST SCSI-II]
SCSI device sda: hdwr sector= 512 bytes. Sectors= 2134305 [1042 MB] [1.0 GB]
Partition check:
sda: sda1 sda3 sda4 sda5 sda6
esp1: target 0 [period 100ns offset 15 10.00MHz FAST SCSI-II]
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 2059140 [1005 MB] [1.0 GB]
sdb: sdb1
esp1: target 1 [period 100ns offset 15 10.00MHz FAST SCSI-II]
SCSI device sdc: hdwr sector= 512 bytes. Sectors= 2059140 [1005 MB] [1.0 GB]
sdc: sdc1
esp1: target 2 [period 100ns offset 15 10.00MHz FAST SCSI-II]
SCSI device sdd: hdwr sector= 512 bytes. Sectors= 2059140 [1005 MB] [1.0 GB]
sdd: sdd1
esp1: target 5 [period 100ns offset 15 10.00MHz FAST SCSI-II]
SCSI device sde: hdwr sector= 512 bytes. Sectors= 2059140 [1005 MB] [1.0 GB]
sde: sde1
sunlance.c:v2.00 11/Sep/99 Miguel de Icaza ([EMAIL PROTECTED])
eth0: LANCE 08:00:20:7c:8a:88
eth0: using auto-carrier-detection.
eth1: LANCE 08:00:20:7c:8a:88
Sparc Zilog8530 serial driver version 1.58
Sun Mouse-Systems mouse driver version 1.00
tty00 at 0xffeeb004 (irq = 44) is a Zilog8530
tty01 at 0xffeeb000 (irq = 44) is a Zilog8530
tty02 at 0xffee4004 (irq = 44) is a Zilog8530
tty03 at 0xffee4000 (irq = 44) is a Zilog8530
keyboard: not present
Console: ttyS0 (Zilog8530)
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 112k freed
INIT: version 2.78 booting
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Welcome to Raw Hide Cooker Linux
Press 'I' to enter interactive startup.
Mounting proc filesystem <= end of console output...
-
To unsubscribe from this list: send the line "unsubscribe sparclinux" in
the body of the message to [EMAIL PROTECTED]
