Good morning. We are in the process of inheriting a set of Spectra-based applications from a developer that is leaving our project. I know that Spectra is what is being called a "Community Source licensing model", however I am not quite sure how that affects our ability of getting tech support. I figured I would start here first to see if anybody else has seen this encountered the following problem (and came up with a different solution). Also, our present solution (as discussed below) is the installation of the eWebEditPro client; while it seems to be stable, I wanted to see if anybody has had problems with running the client.
We are currently under direction to put all of our web-based applications on SSL-enabled servers and to require SSL for these applications. We are using a valid SSL key that the browser recognizes. Everything in our Spectra applications works fine with the SSL key (https) up until you hit a page that loads the Ektron eWebEditPro control. The control loads, but then you get a dialog message that states the version of the ActiveBar ActiveX control by Data Dynamics that you are using is the 30 day evaluation version. This happens every time you hit the control for the first time; in other words, if you close your browser and then come back into the application, when the control gets launched, the dialog box will come up again. At the present time, as we are in testing we are not running with SSL being required by the web server. If I switch back to http, the problem disappears. However, that was only a temporary solution as we have to require SSL for these applications. Here is the set up on the server: - Windows NT 4.0 Server, Service Pack 6a, and the appropriate security patches - IIS 4.0 and the appropriate security patches - Spectra 1.5.1 - CF 5 On the client side, we are using a mixture of IE 5.5 (SP2) and IE 6.x (and the appropriate service packs). Here is what we have done to correct the problem: - This problem was initially discovered with v2.1.0.4 of the Ektron eWebEditPro control. - We have downloaded the latest updates for Spectra via http://spectrasource.macromedia.com/update.cfm?dl=1 - We retested; the problem still occurred. - We have downloaded and installed the latest Ektron eWebEditPro control (v2.6.0.7) - We retested; the problem still occurred. - We examined the Ektron online support entry for this problem at http://www.ektron.com//support/ewebeditprokb.cfm?doc_id=1534. - We were able to fix the problem by running the client installation of eWebEditPro. As mentioned in my opening paragraph, the eWebEditPro client seems to be stable but I wanted to find to see if anybody has encountered any problems with running the client (vice the just the control). Thanks, Jim. ______________________________________________________________________ This list and all House of Fusion resources hosted by CFHosting.com. The place for dependable ColdFusion Hosting. ------------------------------------------------------------------------------ To Unsubscribe visit http://www.houseoffusion.com/index.cfm?sidebar=lists&body=lists/spectra_talk or send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
