Georges, if you run discovery in CiscoWorks check also your snmp community list. Maybe you have to make entries for router interface IP adresses.
But: I'm sure: It's possible to get no authentication alarm from CiscoWorks. In 3 months or earlier will you get new authentication alarms from CiscoWorks. And in 6 Months or earlier you will be happy if there are not more then 10 such alarms per day. Regards Frank Frank Elliger Abteilung Informatik HUK-COBURG Bahnhofsplatz 96444 Coburg Telefon 09561 96-1870 Telefax 09561 96-3670 E-Mail [EMAIL PROTECTED] Internet www.HUK.de ============================================================= HUK-COBURG Haftpflicht-Unterstützungs-Kasse kraftfahrender Beamter Deutschlands a. G. in Coburg Reg.-Gericht Coburg HRB 100; St.-Nr. 9212/101/00021 Sitz der Gesellschaft: Bahnhofsplatz, 96444 Coburg Vorsitzender des Aufsichtsrats: Werner Strohmayr. Vorstand: Rolf-Peter Hoenen (Sprecher), Wolfgang Flaßhoff, Stefan Gronbach, Klaus-Jürgen Heitmann, Dr. Christian Hofer, Dr. Wolfgang Weiler. ============================================================= ________________________________ Von: Sobrinho, John [mailto:[EMAIL PROTECTED] Gesendet: Donnerstag, 20. November 2008 21:30 An: spectrum Cc: Georges Touma Betreff: RE: [spectrum] Spectrum and Ciscoworks are you doing anything in Ciscoworks that requires the snmp rw string ? some of the rme jobs require snmp rw. ________________________________ From: Nolz Andreas [mailto:[EMAIL PROTECTED] Sent: 2008, November, 20 9:19 AM To: spectrum Cc: Georges Touma Subject: RE: [spectrum] Spectrum and Ciscoworks Georges, you can configure more than one community on a Cisco device. It will work with Spectrum. It seems to be a Cisco Works Problem. Did you change the community which is used by Cisco Works? We had this problem after changing communities. We had to reinitialize Cisco Works DFM Database. Regards Andreas From: Georges Touma [mailto:[EMAIL PROTECTED] Sent: Thursday, November 20, 2008 11:45 AM To: spectrum Subject: [spectrum] Spectrum and Ciscoworks Hello Gurus, We are using Spectrum to monitor Cisco routers. On each router, we have two snmp communities set: 1-Read/Write also configured in the model in spectrum 2-Read only used in CiscoWorks We are continuously getting an authentication alarm sourced from the CiscoWorks host and we are sure that the CiscoWork Snmp community is set correctly on ciscoworks. It does not seem that I can configure two communities for the model in spectrum... Did anyone face this? Any ideas what would be causing this? Best regards, --- Georges Touma System and Network Specialist NavLink |* http://www.navlink.com<http://www.navlink.com/> |* [EMAIL PROTECTED]<mailto:[EMAIL PROTECTED]> |* +966 1 4522647 |( +966 50 3310725 * --To unsubscribe from spectrum, send email to [EMAIL PROTECTED]<mailto:[EMAIL PROTECTED]> with the body: unsubscribe spectrum [EMAIL PROTECTED] * --To unsubscribe from spectrum, send email to [EMAIL PROTECTED]<mailto:[EMAIL PROTECTED]> with the body: unsubscribe spectrum [EMAIL PROTECTED] _______________________________________________________________________ This e-mail may be privileged and/or confidential, and the sender does not waive any related rights and obligations. Any distribution, use or copying of this e-mail or the information it contains by other than an intended recipient is unauthorized. If you received this e-mail in error, please advise me (by return e-mail or otherwise) immediately. Ce courrier électronique est confidentiel et protégé. L'expéditeur ne renonce pas aux droits et obligations qui s'y rapportent. Toute diffusion, utilisation ou copie de ce message ou des renseignements qu'il contient par une personne autre que le (les) destinataire(s) désigné(s) est interdite. Si vous recevez ce courrier électronique par erreur, veuillez m'en aviser immédiatement, par retour de courrier électronique ou par un autre moyen. * --To unsubscribe from spectrum, send email to [EMAIL PROTECTED]<mailto:[EMAIL PROTECTED]> with the body: unsubscribe spectrum [EMAIL PROTECTED] --- To unsubscribe from spectrum, send email to [EMAIL PROTECTED] with the body: unsubscribe spectrum [EMAIL PROTECTED]
