Hi Jan-Erik,
Those are valid and loaded questions. As far as the Entity MIB, I assume you
are talk about the Cisco devices.
See the attachment below.
Thanks.
Charles
CISCO-ZS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
Integer32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION,
TimeStamp,
TruthValue
FROM SNMPv2-TC
entPhysicalIndex
FROM ENTITY-MIB
ciscoMgmt
FROM CISCO-SMI;
entitySensorMIB MODULE-IDENTITY
LAST-UPDATED "9812102112Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Postal: Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
Tel: +1 408 526 4000
E-mail: [email protected]"
DESCRIPTION
"The CISCO-ENTITY-SENSOR-MIB is used to monitor
the values of sensors in the Entity-MIB (RFC 2037)
entPhysicalTable."
::= { ciscoMgmt 91 }
entitySensorMIBNotifications
OBJECT IDENTIFIER ::= { entitySensorMIBNotificationPrefix 0 }
entitySensorMIBObjects
OBJECT IDENTIFIER ::= { entitySensorMIB 1 }
entitySensorMIBNotificationPrefix
OBJECT IDENTIFIER ::= { entitySensorMIB 2 }
entitySensorMIBConformance
OBJECT IDENTIFIER ::= { entitySensorMIB 3 }
entSensorThresholdNotification NOTIFICATION-TYPE
OBJECTS { entSensorThresholdValue, entSensorValue }
STATUS current
DESCRIPTION
"The sensor value crossed the threshold
listed in entSensorThresholdTable.
This notification is generated once each time
the sensor value crosses the threshold.
The agent implementation guarantees prompt, timely
evaluation of threshold and generation of this
notification.
"
--#TYPE "Threshold"
--#SUMMARY "Entity exceeded the threshold value %d. Current Value is
%d."
--#ARGUMENTS {0,1}
--#SEVERITY WARNING
--#GENERIC 6
--#CATEGORY "Error Events"
::= { entitySensorMIBNotifications 1 }
END
________________________________________
From: [email protected] [mailto:[email protected]]
Sent: Thursday, February 26, 2009 7:00 AM
To: spectrum
Subject: [spectrum] Traps for l2tp tunnel sessions and SNMP trap config.
Hi,
Is there a way to get a trap for a l2tp tunnel session, not the tunnel itself
but the ppp session.
Anyone knowing the specific behaviour of the entity trap, one differens from
the envmon trap is that the entity discover problems with power supply fan, and
the envmon discovers problem with the chassie fan.
I have searched all the doc. I could find, but there is no detailed
description.
Do you have any suggestions about logging and buffered logging and the size of
the buffer.
Regards
Jan-Erik Frilén
Vattenfall Eldistribution AB
Communication Network
Distribution Nordic
SE-971 77 Luleå
Visit: Timmermansgatan 25
Phone +46 920 77221
Mobile +46 70 3677221
[email protected]
www.vattenfall.se
Pleace consider the environment before printing this e-mail
* --To unsubscribe from spectrum, send email to [email protected] with the body:
unsubscribe spectrum [email protected]
<html>
<body>
<p>***********************************************************************</p>
<p>The information in this email is confidential and may be legally privileged.
It is intended solely for the addressee. Access to this email by anyone else is
unauthorized. If you are not the intended recipient, any disclosure, copying,
distribution or any action taken or omitted to be taken in reliance on it, is
prohibited and may be unlawful. When addressed to our clients any opinions or
advice contained in this email are subject to the terms and conditions
expressed in the governing KPMG client engagement letter.</p>
<p>***********************************************************************</p>
</body>
</html>
---
To unsubscribe from spectrum, send email to [email protected] with the body:
unsubscribe spectrum [email protected]
