Omar, Back up the primary SS and copy the <dbsavefile> to the secondary SS in the ./SS directory. For a hot standby, you'll want to add secondary_polling=yes in the ./SS/.vnmrc file on the secondary SS. You need to load the database on the secondary SS but give it a different precedence:
../SS-Tools/SSdbload -il -add 20 <dbsavefile> Once you've loaded the db on the secondary server, start the spectroserver. Run a MapUpdate -view > ./MapUpdate -view Connecting to Location Server running at: SPEC01 port 0xdaff Landscape Service Type Name IP Address Hostname Port Prec Flags --------- ------------------ --------------- ------------------------ ------ ---- ----- 0x100000 Landscape Default 10.1.1.1 SPEC01 0xbeef 10 0 0x100000 Landscape 10.1.1.1 SPEC01 0xbeef 10 0 0x100000 Stats 10.1.1.1 SPEC01 0xbafe 10 0 0x100000 Landscape Default 10.1.1.2 SPEC02 0xbeef 20 0 <---- Secondary SS 0x100000 Landscape 10.1.1.2 SPEC02 0xbeef 20 0 <---- Secondary SS 0x100000 Events 10.1.1.1 SPEC01 0xbafe 10 0 After you have both SS's running, you'll want to test that the database backup on the primary SS is syncing with the secondary SS. Back up the primary SS. Check the ./SS/RCPD.OUT file on the primary SS and secondary SS to confirm that the db_backup was sent from the primary to the secondary and loaded. Good luck. Karen Kedda Enterprise Monitoring Solutions Berkley Technology Services LLC [email protected] 03/03/2009 10:02 AM Please respond to [email protected] To "spectrum" <[email protected]> cc Subject [spectrum] Spectrum fault tolerance Hi everyone, I have two Spectrums 8.1 in my lab environment and I'm trying to setup fault tolerance between them. I've followed instructions from document 2770.pdf but was unable to do it. There is a problem after loading the database (from primary server) to secondary server. SSdbload process says everything's ok but when I start secondary SS landscape 0x100000 is loaded with precedence 10 - the same as primary server. After that following message is displayed - 'WARNING: Two servers on pero port 0xbeef and sedam-spectrum.int.sedamit.hr port 0xbeef have the same service Landscape 0x100000 Service Type "Landscape" and precedence 10.' I've made database save on primary server with 'Save database' in Control Panel when SS was shutdown. Then I've copy/pasted that file to secondary server and loaded the database. Everything went well according to messages on the screen. There are just 69 models loaded to SS when starting it and it should have been more than 1000. I've made hot standby scenario active. There is normal connectivity between the servers and pero is not in DNS. I'm sending you files that I've edited/changed during setup and also displays of various commands. Please help me out with this issue. Regards, ------------------------------------------------------------------------------ Omar Izetbegović Sedam IT d.o.o. Borongajska cesta 81a, 10000 Zagreb, Croatia, EU phone: ++385(0)1 2353 738 mob:++385(0)91 2353 738 fax: ++385 (0)1 2353 707 web: www.sedamIT.hr ------------------------------------------------------------------------------ --To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected] [attachment "2009-03-03 Problem.rar" deleted by Karen Kedda/DE/BTS/WRBerkley] ************* CONFIDENTIALITY NOTICE: This e-mail and the transmitted documents contain private, privileged and confidential information belonging to the sender. The information therein is solely for the use of the addressee. If your receipt of this transmission has occurred as the result of an error, please immediately notify us so we can arrange for the return of the documents. In such circumstances, you are advised that you may not disclose, copy, distribute or take any other action in reliance on the information transmitted. --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
