Dear list, This problem we noticed when discovering using eHealth, but the problem is rather specific to the device to be monitored.
We have a very weird behavior at the customer site, I can't explain. The customer has an "XP-8000 - Enterasys Networks Firmware Version: E10.00.19.0004 PROM Version: prom-E3.2.0.0" sitting in his network. Discovering/Polling this router using eHealth works fine, i.e. the SNMP communities used by eHealth to perform these operations are the right ones. I event used a network sniffer, but found no SNMP package using another Community then the correct one. The customer notices that the router sends out "authorization failure" traps during every discovery of it. According to the router logs the only device accessing the router using SNMP is eHealth and there is a strong timely correlation between the discovery operation and the traps. Is this a known phenomenon, you've already heard about? Could it be a limitation at the router, e.g. the router doesn't like that many SNMP requests in a short time. Many thanks, Hilmar -- Hilmar Preuße E-Mail: [email protected] amasol AG, Elsenheimerstraße 7 80687 München Tel +49 89 1894743-18 Fax +49 89 1894743-99 amasol Aktiengesellschaft für Informations- und Kommunikationstechnologie Aufsichtsrat: Prof. Dr. Stephan Kaiser (Vorsitzender) Vorstand: Wolfgang Bachmann, Stefan Deml, Thomas Dirsch, Johann Maurer Amtsgericht München HRB 128327, Sitz der Gesellschaft München --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
