Hi, If I set the age time say 5 minutes for a collection of interfaces in the SANM policy filter and if the link goes up say in 2 minutes what would happen to the link down alarm held by the filter?
============================================= Age Time Indicates the time for which the filter holds the alarm. The alarm passes to the alarm processing application after the age time. =========================================== Regards, Jack On Thu, Mar 26, 2009 at 10:20 PM, Kevin Hain <[email protected]> wrote: > If you have not applied a SANM policy you should receive the “Interface > Down” alarm immediately. By default there is an attribute call “Alarm on > Link Down Trap” where is check’s the interface admin status. > > > > You can apply a SANM policy to age out your interface down alarms, meaning > the interface would have to be down for a period of time i.e. 3 minutes > prior to raising an alarm. > > > > Regards, > > Kevin > > > > *From:* Jack doe [mailto:[email protected]] > *Sent:* Wednesday, March 25, 2009 3:31 PM > *To:* "spectrum" <[email protected]> > *Subject:* [spectrum] Link Down alarm > > > > Hi List , > > > > How long will spectrum wait before it generates a link down alarm after > receiving a link down trap from a interface? . > > I believe it waits for some time to check for flapping interfaces and > generates alarms for flapping interfaces, but in case the link is not > flapping and its really down what period does it wait for and vice versa for > clearing? > > > > Regards, > > > > Jack > > > > > > - --To unsubscribe from spectrum, send email to [email protected] with > the body: unsubscribe spectrum [email protected] > > > > > --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
