Hi Erwin, list, thanks for your reply.
Probably I was not clear enough: - want to modify AuthFailureTrap (4.0) sent by Matrix switches - search for folder responsible for ModelType "MatrixN" (if any) Meanwhile I tried to modify "CsVendor/enterasys/AlertMap" by adding the following line: 4.0 0x10017 1.3.6.1.4.1.5624.1.2.60.1.2.4(1,0) ...0x10017 is the event config inclusive source IP, the var oid (from enterasys) contains the IP address. But after having updated Spectrum to reread the event config the resulting event is still 0x1030a (auth failure without IP). Searched some more through CsVendor and the used AlertMap could be "IETF/Alertmap"? That's why I search for specific folder where I can modify the handling especially for Enterasys/MatrixN. Nevertheless your hint regarding searching for OIDs guided me back to my very old plan to work out a list/mapping which traps (for which MTs) generate which event(s). ...so again thanks for your reply! Unfortunaltely I'm still searching were to place my modification to get it working :-( Regards, Marcel On Tue, Mar 31, 2009 at 10:51 AM, De Munter, Erwin <[email protected]> wrote: > I use a very small script to look for trap OID, or event codes. > First create two file, which contains all your alertmaps, and eventdisp > files on the system ( SS/CSVendor and /custom ) > by a find command.. > > Then you can search all the files, by script + oid in argument. > > Any idea which enterasys mibs are supported in the Matrix series ? I know > a lot of enterasys mibs are not implemented on the matrix series > > http://www.keenzo.com/pimg/pdf/1261_V2H12424.pdf enterasys mibs > http://www.snmplink.org/cgi-bin/nd/m/Ent/C/Cabletron%20Systems,%20Inc.%20(CSI)/Enterasys%20Networks/Enterasys%20Networks/ > > Or much easier, do you have the event code or oid from one of the events > you want to modify retrieved from the event list ? > > Regards, Erwin --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
