Hello, I've been wondering if it is possible to have multiple instances of SSLOGGER running (something similar to SANM - everyone in its own folder).
I need to know when Interface Address Translation Table changes (when new equipment is connected) on switches. I thought I might pull this table periodically and see if anything changes. Unfortunately I couldn't find a way to "convince" Spectrum to do it and I thought a separate instance of SSLOGGER might do the trick because I need to poll the switches only once in a half an hour or such. Is anyone aware of another way to have this done? (detect a change in Interface Address Translation Table) Thank you, Regards, Eugen NAIMAN CONFIDENTIALITY NOTICE AND DISCLAIMER The information in this transmission may be confidential and/or protected by legal professional privilege, and is intended only for the person or persons to whom it is addressed. If you are not such a person, you are warned that any disclosure, copying or dissemination of the information is unauthorised. If you have received the transmission in error, please immediately contact this office by telephone, fax or email, to inform us of the error and to enable arrangements to be made for the destruction of the transmission, or its return at our cost. No liability is accepted for any unauthorised use of the information contained in this transmission. If the transmission contains advice, the advice is based on instructions in relation to, and is provided to the addressee in connection with, the matter mentioned above. Responsibility is not accepted for reliance upon it by any other person or for any other purpose. --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
