Steve,
Couple of other things to check, in the order of most likely to least likely: Does the Community name Spectrum will use to contact the device match what's on the device itself? In other words, it sounds like you have Spectrum set up to accept any traps with the Community Name of 'public,' but Spectrum will use a separate community name as defined in the Tools àUtilities àDiscovery à New Discovery tool. There should be some community names in there. Spectrum will try them in the order listed. The next thing I'd check is that the device itself doesn't have an access list that excludes the SpectroSERVER's IP address/Community Name. Lastly, and least likely, I would recommend checking your Thread Information (under the SpectroSERVER Control tab), to make sure that you aren't maxed out on your Notification threads, and have some Notification Latency, but since you can see the traps in the VNM, I don't think that's a problem. If none of those are the issue, then I'm stumped. Cliff From: Steve Kato [mailto:[email protected]] Sent: Friday, April 03, 2009 12:40 PM To: HUNGERFORD, CLIFF [AG/1000] Subject: RE: [spectrum] trap based discovery Yes - I have the correct community name. I am using net-snmp to do the tests. My test trap is: snmptrap -v 1 -c public 172.19.222.121 1.3.6.1.4.1.1234 "" 6 1 "" 1.3.6.1.4.1.1234.1 s "test trap" ________________________________ From: HUNGERFORD, CLIFF [AG/1000] [mailto:[email protected]] Sent: Friday, April 03, 2009 10:32 AM To: spectrum Subject: RE: [spectrum] trap based discovery Steve, I don't think you've missed anything; it should work. I assume you've already checked the SNMP Community name, to make sure that the devices are sending what Spectrum is expecting. I'm doing it here with three different SNMP ports. Works like a charm. From: Steve Kato [mailto:[email protected]] Sent: Friday, April 03, 2009 12:09 PM To: spectrum Subject: [spectrum] trap based discovery Hi - I have set up trap based continuous discovery and enabled unmanaged trap handling but do not get any new devices when I send a trap from a new device. I can see the traps coming in going to the VNM events, but I thought trap based continuous discovery would automatically create a new model under New Devices. Any hints? Is there some configuration I'm missing? Steve Kato Recreational Equipment Inc. (REI) http://www.rei.com <http://www.rei.com/> email: [email protected] phone: 253-437-7309 * --To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected] This e-mail message may contain privileged and/or confidential information, and is intended to be received only by persons entitled to receive such information. If you have received this e-mail in error, please notify the sender immediately. Please delete it and all attachments from any servers, hard drives or any other media. Other use of this e-mail by you is strictly prohibited. All e-mails and attachments sent and received are subject to monitoring, reading and archival by Monsanto, including its subsidiaries. The recipient of this e-mail is solely responsible for checking for the presence of "Viruses" or other "Malware". Monsanto, along with its subsidiaries, accepts no liability for any damage caused by any such code transmitted by or accompanying this e-mail or any attachment. * --To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected] --------------------------------------------------------------------------------------------------------- This e-mail message may contain privileged and/or confidential information, and is intended to be received only by persons entitled to receive such information. If you have received this e-mail in error, please notify the sender immediately. Please delete it and all attachments from any servers, hard drives or any other media. Other use of this e-mail by you is strictly prohibited. All e-mails and attachments sent and received are subject to monitoring, reading and archival by Monsanto, including its subsidiaries. The recipient of this e-mail is solely responsible for checking for the presence of "Viruses" or other "Malware". Monsanto, along with its subsidiaries, accepts no liability for any damage caused by any such code transmitted by or accompanying this e-mail or any attachment. --------------------------------------------------------------------------------------------------------- --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
