Have a look at the Link Layer Discovery Protocol (LLDP). Similar to the Cisco Discovery Protocol (CDP) it should show the devices connected to each interface on a supported switch (Cisco, Juniper, Extreme, Microsoft, as well some others support LLDP). If you can find the table within the mib then you should be able to expose the table in a OneClick view for the device. I don't have a large enough lab to test this so I've been experimenting whenever I can when I get to a customer site. Theoretically this should provide the detail you want.
The other thing is to use Policy Manager to suppress alarms for devices that send Bad Link traps that don't have anything modelled off them in Spectrum. There was an example on the http://www.dachsug.ch of how to do this and the rules and files required is explained in the Policy Manager doco. Theory here is if you don't modell the device connected to a switch port then why are you interested in the "bad link" info for the port. I hope some of this helps. __________________________________________ Patrick Hopgood ��� [email protected] -----Original Message----- From:�������������� [mailto:[email protected]] Sent: Friday, July 10, 2009 7:03 PM To: spectrum Cc: spectrum Subject: Re: [spectrum] Device Connected Hi, That one i know but i need the opposite direction i want to know if i getting down interface how is connect to without discoer the device 2009/7/10 "��ßler, Christoph" <[email protected]>: > Hi, > > maybe you can use the Locator search "Host finder" under "Devices". > This search is for scanning the devices, if the heard the ip/hostname of a > connected system. > > Regards > -- > Christoph K������ler������������������������E-Mail: [email protected] �� amasol AG, Elsenheimers���������e 7, 8068��������nchen, Germany �� Phone: +49 89 1894743-2����������� Fax: +49 89 1894743-99 > > amasol Aktiengesellschaf���������r Informations- und > Kommunikationstechnologie > Aufsichtsrat: Dr. Stephan Kaiser (Vorsitzender) > Vorstand: Wolfgang Bachmann, Stefan Deml, Thomas Dirsch, Johann Maurer > Amtsgerich���������nchen HRB 128327, Sitz der Gesellschaft������nchen >> -----Original Message----- >> From����������������������������� [mailto:[email protected]] >> Sent: Friday, July 10, 2009 10:45 AM >> To: spectrum >> Subject: [spectrum] Device Connected >> >> Hi, >> >> I need to see every interface who is connected to him and I'm talking >> about devices that are not discover at spectrum. >> There is any why with the mib to get out which device \ server is >> connected to that interfaces without discover them. >> >> Eran >> >> --- >> To unsubscribe from spectrum, send email to [email protected] with the >> body: unsubscribe spectrum [email protected] > > --- > To unsubscribe from spectrum, send email to [email protected] with the > body: unsubscribe spectrum [email protected] --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected] --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
