There's an attribute "NCM_TFTP_Server" or "NCM_FTP_Server" which is available on the Attribute Editor - if you set that to be the NAT IP for your Spectroserver specifically on those devices, all should be groovy.
Dave -----Original Message----- From: Page, Jonathan [mailto:[email protected]] Sent: 02 September 2009 12:34 To: spectrum Subject: [spectrum] NAT and Network Configuration Manager I am running Spectrum 8.1 and for the most part I am getting to the network NOT using a NAT address but the SpectroServer real IP address. However, there is one part of my network that is over a WAN connection and the firewall translates my SpectroServer real IP address to a NAT to communicate to those specific sites. I am having a problem pulling back router configurations from those devices. After throubleshooting we detrmined that the SpectroServer is providing the router the real IP address of Spectrum and not the NAT'ted address so when the router tries to send the configuration back to Spectrum it dies. Is it possible to tell Spectrum to provide just these routers the NAT'ted IP address of Spectrum so they know how to sent their router configuration, maybe through attribute editor? I am thinking an SDC probably would fix this also, but was looking for an easier solution. Thanks for the help! --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected] ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________
smime.p7s
Description: S/MIME cryptographic signature
