I'm going through the Spectrum 9 admin guides for Event Configurations.
Maybe I'm overlooking something simple.
I have a server where I have a script that send over SNMP traps to my
spectrum server. Obviously since there is not an out of the box Spectrum
event/rule already, they show up under the VNM model as a raw SNMP trap.
Here is an example:
Event : Trap 6.1073748860 received from unknown SNMP device with IP
address 172.19.55.113 and community string 'public'. Trap identifier
1.3.6.1.4.1.311.1.13.1.23.83.101.114.118.105.99.101.32.67.111.110.116.11
4.111.108.32.77.97.110.97.103.101.114.
Trap var bind data:
OID: 1.3.6.1.4.1.311.1.13.1.9999.1.0 Value: The
Advantage Data Transformer Web Server service entered the stopped state.
OID: 1.3.6.1.4.1.311.1.13.1.9999.2.0 Value: Unknown
OID: 1.3.6.1.4.1.311.1.13.1.9999.3.0 Value: TX1TESTSPC09
OID: 1.3.6.1.4.1.311.1.13.1.9999.4.0 Value: 4
OID: 1.3.6.1.4.1.311.1.13.1.9999.5.0 Value: 0
OID: 1.3.6.1.4.1.311.1.13.1.9999.6.0 Value: Advantage
Data Transformer Web Server
OID: 1.3.6.1.4.1.311.1.13.1.9999.7.0 Value: stopped
So how do I get this raw SNMP data converted to a Spectrum Alert that is
critical? What are the steps? Any assistance would be greatly
appreciated.
TIA,
-----------------------------------------------------------------
This message may contain DynCorp International Privileged/Proprietary
information. If this email is not intended for you, and you are not responsible
for the delivery of this email message to the addressee, do not keep, copy or
deliver this email message to anyone. Please destroy this email in its entirety
and notify the sender by reply email. Your cooperation is appreciated.
-----------------------------------------------------------------
---
To unsubscribe from spectrum, send email to [email protected] with the body:
unsubscribe spectrum [email protected]
