I have noticed that for some reason the typical attributes used in previous versions of Spectrum (Prior to 9.0) don't see to apply for 9.1 with respect to disabling alarms on a port by port basis.
I did however come across a new "Alarm Configuration" section in OneClick (located under the interface model section for each interface) that when the "generate alarm on port field is set=no" port up/down alarms are not processed for this particular interface. I need to apply this to a huge number of ports and am unable to to this in mass. I tired seeing what attributes it changed or using the locator so I could bring up all the interfaces for a particular device of which neither method will allow me to do so. I guess my question(s) are really at this point 1) Has anyone been able to figure out how to set the "generate alarm on port" value = no for multiple ports at once on a per device basis or 2) What method(s) are folks using in 9.1 to disable end user port alarms in spectrum but still receive traps from these same devices when up link or ports connected to network devices go down Thanks. Andy Stein Duke Medicine Network and System Management Technologies [email protected] Office (919) 681-2739 Mobile (919) 402-7627 --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
