Hi Spectrum Group, The last week some people helped me with my Spectrum NCM configuration and I fixed many of the configutaion capture problems, just incresing the timeout. So I fixed my problem capturing the Enterasys devices configuration.
The problem was that I have some Cisco 3825 devices which I could not capture the configuration, they are configured with SNMP v3. When I use the capture option it displayed the next error message: "Error captutring configuration for host: Failure." My Cisco 3825 SNMPv3 configuration is the next: *************************************** access-list 11 permit 172.20.40.11 snmp-server group yyyy_group v3 priv snmp-server location "Edif. Matriz, 4to Piso, Centro Computo, Rack Comunicaciones 2" snmp-server contact "Redes y Comunicaciones Ext 2400" snmp-server host 172.20.40.11 xxxx_xxxx_v3 snmp-server file-transfer access-group 11 protocol tftp snmp-server file-transfer access-group 11 protocol ftp *************************************** According to the manual I have configured a SNMP User associated to a yyyy_group which is a SNMP v3 group, and use priv and auth security parameters. Some one have any suggestion or ideas of something that I have ommited in my SNMP configuration on Cisco 3825 device? PD: I do not use Firewall or NAT, the Cisco Device is in the same network of the Spectrum server. Atentamente, Víctor Barrionuevo Dirección de Informática - Redes y Soporte Banco Central del Ecuador Av. 10 de Agosto N11-539 y Briceño Teléf: (593) (2) 2572522 Ext. 2416 --- To unsubscribe from spectrum, send email to lists...@unc.edu with the body: unsubscribe spectrum arch...@mail-archive.com
