List, I have Spectrum 9.1.2 on win 2003,
SpectroServer and Oneclick on same server behind Cisco ASA Firewall - IP behind firewall is 10.2.250.10 IP seen by all devices is 10.6.3.21 NAT is done in firewall - Problem: NCM Cannot pull configs because the devices are trying to send back to 10.2.250.10 which is not reachable on the public side. Anyone seen this issue with placing Spectrum Behind firewall? Can NCM be configured to be seen as coming from a different IP than what the Server is physically IP'ed? shown below is debug snmp packets--- 000395: Feb 22 07:18:48.106: SNMP: Packet received via UDP from 10.6.3.21 on Serial0/2/0 000396: Feb 22 07:18:48.106: SNMP: Set request, reqid 15466973, errstat 0, erridx 0 ccCopyTable.1.14.21861 = 4 ccCopyTable.1.3.21861 = 4 ccCopyTable.1.4.21861 = 1 ccCopyTable.1.5.21861 = 10.2.250.10 ccCopyTable.1.6.21861 = SCM_0x41afb1 000397: Feb 22 07:18:48.150: SNMP: Response, reqid 15466973, errstat 0, erridx 0 ccCopyTable.1.14.21861 = 4 ccCopyTable.1.3.21861 = 4 ccCopyTable.1.4.21861 = 1 ccCopyTable.1.5.21861 = 10.2.250.10 ccCopyTable.1.6.21861 = SCM_0x41afb1 ****************************************************************************** This email and any files transmitted with it are intended solely for the use of the individual or agency to whom they are addressed. If you have received this email in error please notify the Navy Exchange Service Command e-mail administrator. This footnote also confirms that this email message has been scanned for the presence of computer viruses. Thank You! ****************************************************************************** --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
<<image/gif>>
