Hi All, We are looking into directing traps to Spectrum from an OpenView installation. However after importing the trap mib there is only one event id with one severity, associated
with all the incoming messages( cpu, disk, Memory, Events, etc). Has
anyone else already had experience with this? What would be the most
efficient way to handle these
messages in order to get separation of types and severities?
The OVNMEvents_NNM.mib when imported into Spectrum :
AlertMap
# ovnmMessage AdapterVersion
1.3.6.1.4.1.11.779.6.5 0xfff00000 1.3.6.1.4.1.11.779.1(1,0)\
# ToolID
1.3.6.1.4.1.11.779.2(2,0)\
# Severity
1.3.6.1.4.1.11.779.3(3,0)\
# Application
1.3.6.1.4.1.11.779.4(4,0)\
# Object
1.3.6.1.4.1.11.779.5(5,0)\
# NodeName
1.3.6.1.4.1.11.779.6(6,0)\
# Manager
1.3.6.1.4.1.11.779.7(7,0)\
# Subject
1.3.6.1.4.1.11.779.8(8,0)\
# SSID
1.3.6.1.4.1.11.779.9(9,0)\
# Customer
1.3.6.1.4.1.11.779.10(10,0)\
# Location
1.3.6.1.4.1.11.779.11(11,0)\
# Layer
1.3.6.1.4.1.11.779.12(12,0)\
# SubSysNum
1.3.6.1.4.1.11.779.13(13,0)\
# EventNum
1.3.6.1.4.1.11.779.14(14,0)\
# Service
1.3.6.1.4.1.11.779.15(15,0)\
# EmsGenTime
1.3.6.1.4.1.11.779.16(16,0)\
# EmsLogTime
1.3.6.1.4.1.11.779.17(17,0)\
# ReceivedTime
1.3.6.1.4.1.11.779.18(18,0)\
# EventText
1.3.6.1.4.1.11.779.19(19,0)
EventDisp
0xfff00000 E 20 A 1,0xfff00000
Thanks
Patrick Murtey
Network and Systems Management Manager
MGM RESORTS Information Technology
[email protected]
---
To unsubscribe from spectrum, send email to [email protected] with the body:
unsubscribe spectrum [email protected]
