What Cliff describes is how it worked in SG. However this functionality never made it into OC. If you need this function there is a possibility to create a GC wich will contain the "green flashing" devices. I just found an earlier post from Haihong Ren which describes the how:
You might be interested in the FlashGreen attribute of the model and the following KB should help too. Solution ID: TS26660 <http://search.support.concord.com/eserver/esupport/consumer/send.asp??activepage=solutionarea.asp&strCurrentSymptom=flash+green&bForceMatch=&bSolutionDoesNotExist=0&number=1&id=GUID85dba9c3_d679_441b_9bc9_494668079440&resource=&strDisplaySymptom=flash+green&bShowRefine=False&bShowPercent=False&activepage=solutionarea.asp> How can SPECTRUM OneClick be used to show which models alarmed after an alarm has cleared? SPECTRUM has an attribute called FlashGreen (attribute id of 0x00011a58) that is used to inform users of alarms that have occurred but have since been automatically cleared. This attribute needs to be set to TRUE (or Yes) in the Attribute Editor on all models that you would like to be notified about. Once this is enabled, you will need to create a Global Collection that has the following parameters: Acknowledged = False Condition = Normal(0) FlashGreen = Yes This will produce a result set that will show all models that have the FlashGreen attribute enabled that have alarmed and the alarms have already cleared. Please keep in mind the following: 1. The default update interval for Global Collections is 24 hours. You will need to increase this interval if you want the collection to update more frequently. 2. The only way to clear the Flash Green setting is to Acknowledge it the same way you would Acknowledge an alarm. The Acknowledge functionality is only available in the Alarms tab. Cheers, Joern Joern Henrichs Senior System Engineer ISS Service Desk Remote Betrieb Computacenter AG & Co. oHG Services & Solutions Voltastraße 1, 60486 Frankfurt, Germany Tel.: +49 69 97779 342 Mobile: +49 173 2946155 Fax: +49 69 97779 110 Short-Dial: 22342 E-Mail: [email protected]<mailto:[email protected]> WWW: www.computacenter.de<http://www.computacenter.de/> Von: HUNGERFORD, CLIFF [AG/1000] [mailto:[email protected]] Gesendet: Dienstag, 15. Juni 2010 15:20 An: spectrum Betreff: RE: [spectrum] Flash Green Parameter Christoph, If you set the FlashGreen to be 'true,' then models that had a previous alarm condition that automatically cleared will flash green, instead of a steady-state green. This used to be enabled by default, now it is disabled by default. If you want to have your icons flash green for these instances, you would change the setting to 'true.' From: Keßler, Christoph [mailto:[email protected]] Sent: Tuesday, June 15, 2010 2:53 AM To: spectrum Subject: [spectrum] Flash Green Parameter Hello, Every model in Spectrum has a attribute called "FlashGreen". If I remember, this attribute is true, if an alarm occurs on the model and was cleared. I think the attribute should be set to true, if a alarm is cleared. I don't have any models with "FlashGreen == True". Have I set the FlashGreen attribute via the AlarmNotifier in the Clearscript manually to use this feature? Thanks. Regards -- Christoph Keßler E-Mail: [email protected]<mailto:[email protected]> amasol AG, Elsenheimerstraße 7, 80687 München, Germany Phone: +49 89 1894743-24 Fax: +49 89 1894743-99 * --To unsubscribe from spectrum, send email to [email protected]<mailto:[email protected]> with the body: unsubscribe spectrum [email protected] This e-mail message may contain privileged and/or confidential information, and is intended to be received only by persons entitled to receive such information. If you have received this e-mail in error, please notify the sender immediately. Please delete it and all attachments from any servers, hard drives or any other media. Other use of this e-mail by you is strictly prohibited. All e-mails and attachments sent and received are subject to monitoring, reading and archival by Monsanto, including its subsidiaries. The recipient of this e-mail is solely responsible for checking for the presence of "Viruses" or other "Malware". Monsanto, along with its subsidiaries, accepts no liability for any damage caused by any such code transmitted by or accompanying this e-mail or any attachment. * --To unsubscribe from spectrum, send email to [email protected]<mailto:[email protected]> with the body: unsubscribe spectrum [email protected] ----------------------------------- Computacenter AG & Co. oHG, mit Sitz in Kerpen (Amtsgericht Köln HRA 18096) Vertretungsberechtigte Gesellschafter: Computacenter Aktiengesellschaft, mit Sitz in Köln (Amtsgericht Köln HRB 28384) Vorstand: Oliver Tuszik (Vorsitzender), Dr. Karsten Freihube, Hans-Georg Freitag, Frank Kottmann, Reiner Louis Aufsichtsrat: Michael Norris (Vorsitzender) Computacenter Management GmbH, mit Sitz in Köln (Amtsgericht Köln HRB 28284) Geschäftsführer: Ulrich Irnich, Jürgen Stauber Visit us on the Internet: http://www.computacenter.de Visit our Online-Shop: https://shop.computacenter.de This email is confidential. If you are not the intended recipient, you must not disclose or use the information contained in it. If you have received this mail in error, please tell us immediately by return email and delete the document. ----------------------------------- --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
