Hi Brad, Here is an exerpt from a how-to I wrote for a customer:
Cisco Router, Switch, and Firewall devices log many internal events in the device's system log, or syslog. Depending upon device configuration, these syslog events may be sent to Spectrum using traps. Spectrum uses the values of three trap variables to map the trap to a Spectrum Event ID. These mappings are contained in three text files on the SpectroServer: $SPECROOT/SS/CsVendor/Cisco_Router/Rtr.txt $SPECROOT/SS/CsVendor/Ctron_CAT/Switch.txt $SPECROOT/SS/CsVendor/CiscoPIX/Pix.txt These text files have the following internal fields, separated by spaces: 1. An abbreviated classification, for example RCMD or SNMP 2. A Cisco severity level, a digit from 0 to 4 3. An abbreviated text description, for example AUTHFAIL 4. A Spectrum Event ID For example: CDP 4 DUPLEXMISMATCH 0x011c0214 Duplex Mismatch syslog events were being mishandled or classified as unknown syslog events by Spectrum; proper handling has been corrected or implemented. Add or change the following lines in file $SPECROOT/SS/CsVendor/Cisco_Router/Rtr.txt CDP 4 DUPLEX_MISMATCH 0x011c0214 Add or change the following lines in file $SPECROOT/SS/CsVendor/Ctron_CAT/Switch.txt CDP 4 DUPLEX_MISMATCH 0x011c0214 Further information about the configuration of these text files can be found in CA Spectrum manual #5127, titled Cisco Applications User Guide. HTH, --Mark S ________________________________ Mark Serencha - Inforonics LLC - (m) +1-781-439-0519 - (w) +1-978-698-7418 - Mark.Serencha_AT_inforonics.com From: Gray, Brad [mailto:[email protected]] Sent: Friday, October 08, 2010 3:01 PM To: spectrum Subject: [spectrum] Monitoring for Duplex Mismatches Greetings all, Is anyone using Spectrum 9.1 to monitor for duplex mismatches? I know I've seen alarms for duplex mismatches in older versions of Spectrum, but cannot find one in 9.1. Am I overlooking something? Kind regards, Brad Bradley Gray Distributed Computing Analyst III ETA Network Support 214-422-6795 [email protected] <mailto:[email protected]> _____________ The information contained in this message is proprietary and/or confidential. If you are not the intended recipient, please: (i) delete the message and all copies; (ii) do not disclose, distribute or use the message in any manner; and (iii) notify the sender immediately. In addition, please be aware that any message addressed to our domain is subject to archiving and review by persons other than the intended recipient. Thank you. _____________ * --To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected] --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
<<image001.png>>
