Hello list,
I have modelled some time ago a Raritan Device http://www.raritan.com.au/products/serial-console-management/dominion-sx/ and since then there is a continuous alarm in Spectrum: "SNMP GET_NEXT Loop Detected" It never cleared, it didn't matter when we have upgraded the appliance firmware and compiled the latest MIBs - the alarm is still there. One of their representative told us that Raritan SNMP supports only Get_Next on the "system" branch (1.3.6.1.2.1.1) and indeed, Spectrum is able to read only whatever is present there and nothing else. Has anyone modelled a Raritan device in Spectrum and successfully dealt with? What is your experience in that? Thank you, Regards, ============================================ Eugen NAIMAN IT Officer ICT Infrastructure Department Health and Human Services 5/99 Bathurst Street, Hobart, 7000 (: (03) 6233 8565 Ê: (03) 6233 6297 [email protected] ============================================ CONFIDENTIALITY NOTICE AND DISCLAIMER The information in this transmission may be confidential and/or protected by legal professional privilege, and is intended only for the person or persons to whom it is addressed. If you are not such a person, you are warned that any disclosure, copying or dissemination of the information is unauthorised. If you have received the transmission in error, please immediately contact this office by telephone, fax or email, to inform us of the error and to enable arrangements to be made for the destruction of the transmission, or its return at our cost. No liability is accepted for any unauthorised use of the information contained in this transmission. If the transmission contains advice, the advice is based on instructions in relation to, and is provided to the addressee in connection with, the matter mentioned above. Responsibility is not accepted for reliance upon it by any other person or for any other purpose. --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
