Hi
I am have an issue pulling information in from a trap into events as they
appear in Spectrum
It relates to an imported set of traps that I have pulled in using MIB Tools
This process has worked successfully - example of the custom alert map
entry as shown
*# latency trap-level
1.3.6.1.4.1.13732.99.1.6.8 0xfff0500a 1.3.6.1.4.1.13732.99.99(1,0)\
# trap-str
1.3.6.1.4.1.13732.99.98(2,0)\
# trap-rem-id
1.3.6.1.4.1.13732.99.97(3,0)\
# trap-sn-id
1.3.6.1.4.1.13732.99.96(4,0)*
I've then created an escalation model based on the trap level which works
just fine, it includes a clear to clear an existing alert
*0xfff0500a R Aprisma.EventCondition, "{VARDATA 1} == { I 0 }", "0xfff05085
-:-", "{VARDATA 1} == { I 1 }", "0xfff05085 -:-", "{VARDATA 1} == { I 2 }",
"0xfff05086 -:-", "default", "0xfff05087"
0xfff05085 E 30 A 2, 0xfff0500a,3, U
0xfff05086 E 30 C 0xfff0500a,3 C 0xfff05085,3
0xfff05087 E 30*
The issue I am having is relating to using one of the variables in the trap
to call a string - this is
*1.3.6.1.4.1.13732.99.97(3,0)\
*
In the event message I have the following lines
*"Latency measurement has exceeded upper limit"*
*trap-level = {T trap-level 1}
trap-str = {S 2}
trap-rem-id = {I 3}
traps-rem-id-names = {Z special-table 3}
trap-sn-id = {I 4}*
*(event [{e}])*
I am attempting to use the trap-rem-id value to call a value from an
eventable called special-table - contents as shown
1 string1
3 TxRx_Slot2_18593
27 Aitutaki
28 Mangala
29 Atiu
30 yep
31 Pukapuka
32 Penrhyn
33 Manihiki
61 Tx/Rx_Slot9_18598
66 Stdy_Slot 10
---
To unsubscribe from spectrum, send email to [email protected] with the body:
unsubscribe spectrum [email protected]
