Hi, Try to use <default-policy-rule-name name="Access Interface Utilization Rule" /> as the second rule. Regards. James.
On Wed, Mar 16, 2011 at 3:54 PM, GATTY Markus <[email protected]> wrote: > Dear spectrum user, > > I have been using policy manager for a while with only ONE policy-rule. Now > I tried to add a second policy-rule and got the alarm "POLICY DATA LOADING > ERRORS" with the following output: > > 16/03/11 15:39:29 : Reloading policy data... > 16/03/11 15:39:29 : Backing up running policy configuration data > 16/03/11 15:39:29 : Loading policy data from local XML files... > 16/03/11 15:39:29 : Policy definitions have changed > 16/03/11 15:39:29 : Policy rule definitions have changed > 16/03/11 15:39:29 : Policy search criteria definitions have changed > 16/03/11 15:39:29 : Policy settings definitions have changed > 16/03/11 15:39:29 : ERROR - Policy "Interface Threshold Policy" specifies a > rule "Access Interface Utilization Rule" that does not exist! > 16/03/11 15:39:29 : Errors still exist in policy data! > 16/03/11 15:39:29 : Not enforcing new policy data... old policies still in > effect > 16/03/11 15:39:29 : Done reloading policy data > > I have checked the syntax of all files many times - there are no mistakes. > It looks like that spectrum has a problem loading the second rule in the > policy-rules.xml. Has anyone experienced the same bevaviour? > > This is my policies.xml: > > <policy-definitions> > <policy name="Interface Threshold Policy" > > <policy-rule-name name="Core Interface Utilization Rule" /> > <policy-rule-name name="Access Interface Utilization Rule" /> > </policy> > </policy-definitions> > > policy-rules.xml: > > <policy-rules-definitions> > <policy-rule name="Core Interface Utilization Rule" > > <port-policy-search-criteria-name name="All Core Ports" /> > <policy-settings-name name="Core Int Utilization Threshold Settings" /> > </policy-rule> > <policy-rule name="Access Interface Utilization Rule" > > <port-policy-search-criteria-name name="All Access Ports" /> > <policy-settings-name name="Access Int Utilization Threshold Settings" > /> > </policy-rule> > </policy-rules-definitions> > > I also tried to switch both rules - without the output: > > 16/03/11 15:39:29 : ERROR - Policy "Interface Threshold Policy" specifies a > rule "Core Interface Utilization Rule" that does not exist! > > It´s always the second rule which could not be found! > > Any ideas? > > > Thanks, > Regards, > DI (FH) Markus Gatty > > LINZ AG TELEKOM > Übertragungstechnik > > Carrier-Netzwerk > > > > Die LINZ AG TELEKOM ist ein Geschäftsbereich der LINZ STROM GmbH > für Energieerzeugung, -handel, -dienstleistungen und Telekommunikation. > > > > 4021 Linz, Wiener Straße 151, Austria > Mobil: +43(0)664/80340-5753 > Tel.: +43(0)732/3400-5753 > Fax: +43(0)732/3400-155753 > E-Mail: [email protected] > Internet: http://www.linzag-telekom.at > > FN 199533 g des Landesgerichtes Linz > > LINZ AG TELEKOM ist nach ISO 9001, OHSAS 18001, ISO 27001 zertifiziert. > > > > > > > > ------------------------------------------------------------------------------------------ > LINZ AG für Energie, Telekommunikation, Verkehr und Kommunale Dienste > A-4021 Linz, Wiener Straße 151, Postfach 1300, Tel. +43/732/3400-0, E-Mail: > [email protected] > ------------------------------------------------------------------------------------------ > > --To unsubscribe from spectrum, send email to [email protected] with the > body: unsubscribe spectrum [email protected] --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
