Hi Ken, Set polling status as well as poll port status (port) values to No.
I hope, it helps. Regards Rajashekar -----Original Message----- From: Kenneth Kirchner [mailto:[email protected]] Sent: Monday, June 20, 2011 11:22 AM To: spectrum Subject: [spectrum] Silence Ports What is the best way to silence a port on a switch or router that you never want to hear from again? Is it as simple as disabling polling? Will that prevent traps on that interface from generating alarms as well? We have a few ports with devices that we have no control over and no responsibility to monitor, so we want to remove that noise from our monitoring. We are currently stuffing these in maintenance mode, but that does not appear optimal. -Ken Spectrum 9.2 H03 --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected] ________________________________ DISCLAIMER: This email (including any attachments) is intended for the sole use of the intended recipient/s and may contain material that is CONFIDENTIAL AND PRIVATE COMPANY INFORMATION. Any review or reliance by others or copying or distribution or forwarding of any or all of the contents in this message is STRICTLY PROHIBITED. If you are not the intended recipient, please contact the sender by email and delete all copies; your cooperation in this regard is appreciated. --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
