Hi Guys,
Environment : Spectrum 9.2 on Linux Red Hat on UCS hardware . SS and OC on same server . Had discovered and modeled a SysEdge Server (Linux Red Hat) running on UCS hardware. Now to receive hardware traps we had enabled trap forwarding on Cisco Integrated Management Controller of that server . Found out that the traps are being sent from the management port (console port or in HP servers called ILO port) of the server instead of the Ethernet ports . Spectrum is not showing these traps on the model as it doesn't identify the IP address (given to console port) from where its coming. Have checked that SysEdge agent (or even SNMP) is not aware of the console port or the IP address it has been given as it works on OS layer. The traps are landing on Spectrum server (checked through tcpdump) . Any suggestions on how I can manage this and successfully receive hardware traps from the servers. Thanks & Regards, Neeraj Raina Mob : +91 - 9582210132 Email : [email protected] Please do not print this email unless it is absolutely necessary. The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. www.wipro.com --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
