Hi Cristiano,
You might want to try this: http://www.dachsug.ch/wiki/index.php/PolicyManager. There is an example with monitoring ports specific ports. At least once you should to the job of sorting the ports to be monitored; that is if you cannot find a common searching algorithm for all of those. If this is the case, you should create a Global Collection with all ports that you want to monitor and then enforce a policy on that GC for the attributes that you are interested in. That way, the only job that you should do is to maintain the GC contents. Hth, Catalin Farcasanu SOLVIT Networks From: Cristiano Pereira da Conceição [mailto:[email protected]] Sent: Monday, August 08, 2011 3:24 PM To: spectrum Cc: spectrum Subject: Re: [spectrum] how to put router ports to unmanagement Hi Ken, Thanks for the help! I knew this solution could be used, but I have lot of routers, an some of these have hundreds of interfaces... I can't used this method... In oldest version, I was able to select more than one interface, at the same time, and put these ports in unmanagement state... Using the method that you indicated, I have to configure the ports, one by one... Can you suggest other way? Regards, Cristiano -------- Mensagem original -------- De: Kenneth Kirchner <[email protected] <mailto:kenneth%20kirchner%20%[email protected]%3e> > Reply-to: Kenneth Kirchner <[email protected]> Para: spectrum <[email protected] <mailto:spectrum%20%[email protected]%3e> > Assunto: Re: [spectrum] how to put router ports to unmanagement Data: Fri, 5 Aug 2011 18:18:47 -0700 Hello Cristiano, I had a similar issue a few weeks ago. My solution was: Under each interface component detail there is an "Alarm Configuration" section (Spectrum v9.2 H03). All we had to do was set "Generate Alarm on Port" to "NO" and that was it (The attribute name is slightly different: GeneratePortStatusAlarms). Polling now doesn't generate an alarm and neither does a trap when said interface goes up or down. The thread title was "Silence Ports" if you want to search the message archive. There was a lot of good info. -Ken On Aug 5, 2011, at 10:02 AM, Cristiano Pereira da Conceição wrote: > HI! > > > I changed my version of the Spectrum, and i'm lost in one thing. > I don't have an option to put router ports to unmanagement... It is > important, becouse I have some ports that are used for some client networks, > that I don't wanna monitor, but these ports are generating alarms in > OneClick... > How can i change the status of these ports to unmanagement, in version 9.2? > Regards, > > > Cristiano Pereira > --To unsubscribe from spectrum, send email to [email protected] with the body: > unsubscribe spectrum [email protected] --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected] * --To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected] --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
