Two weeks ago we had a case with CA' support which the asked me that send they the health inform. They recommended me install a Distributed SpectroServer to reduce the work of SpectroServer. This is our environment:
SpectroServer: A Sun Server with Solaris10; 72Gb HDD, 16 cores and 8Gb Ram. OneClick1 A Sun Server with Solaris10; 150 Gb HDD, 16 cores and 6Gb Ram OneClick2 A Sun Server with Solaris10; 150 Gb HDD, 16 cores and 6Gb Ram We have at least 250.000 models, most of them switches or routers with ports, applications, and traps management to Spectrum. The CPU on the three Servers always run below of 10%, and no problems of memory. But, the health inform and CA says that our machine is overload; Really, CA say that the number of max. Models supported depends a lot of things, but our SpectroServer is 100%. I read somewhere that “One workstation managing fewer than 1000 devices/average 24 ports on each device”. There is something that I don’t understand, if the SS is overload, why it not uses the hardware resources free? What good have a very powerful server if only a 10% will be use? Regards!! --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
