Trying to get NCM to work with our Nexus 7009 and 5548UP devices. I've gotten perl configured and can successfully capture the configurations - at this point I assume the daily capture/verify will work, I haven't been through that period yet.
What I don't have working is the unsolicited capture of the config based upon receiving a config trap from the device when the configuration is changed. Spectrum does receive the trap and sees a ccmCLIRunningConfigChanged event on the model, but that doesn't seem to set off the capture process. I've tried different combinations of information in the Configuration notification Trap Settings dialogs of the Family with no effect so far. Wondering if anyone has this working and can share what they had to do? Phillip Stallcup, CCNA IT Network Architect, Information Technology 405.951.2088 [cid:image007.gif@01CE313F.297CF9C0] <http://integrisok.com/> ********************************************************************** This e-mail may contain identifiable health information that is subject to protection under state and federal law. This information is intended to be for the use of the individual named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited and may be punishable by law. If you have received this electronic transmission in error, please notify us immediately by electronic mail (reply). --- To unsubscribe from spectrum, send email to lists...@unc.edu with the body: unsubscribe spectrum arch...@mail-archive.com
