First off: Whilst you currently can install the Systemedge and VC AIM on the VCentre, from 9.4 HF1 upwards this isn't a supported configuration. You'll need a third server to act as your "AIM" box and install systemedge and VC AIM on there if you don't want a big red "UNSUPPORTED AIM CONFIGURATION" type alarm in OneClick.
Once you've done that you need to go to: C:\Program Files\CA\SystemEdge\Plugins\AIPCommon And in there look for nodecfgutil.exe Run that and enter the VCenter details - it must be accessible via HTTPS from that AIM server. From SystemEdge 12.8 and the associated AIM upwards you can now have more than one VCenter per AIM as well - in older setups you needed one server per AIM. Very unwieldy with large installations. Then discover the AIM server in Spectrum and the Virtual Host Manager should populate. https://supportcontent.ca.com/cadocs/0/CA%20Server%20Automation%2012%207%20SP01-ENU/Bookshelf_Files/HTML/UIHelp/index.htm?toc.htm?configure_aims_command_mode.html Dave David K. Game Consultant – Managed Service Centre (EU) Logicalis UK Ltd +44 (0) 7967 464365 +44 (0) 1753 560553 / 777363 +1 646 797 3283 sip:david.g...@uk.logicalis.com david.g...@uk.logicalis.com __________________________________________________________________ -----Original Message----- From: Jon Magnus Dullerud [mailto:dulle...@gmail.com] Sent: 04 December 2014 11:24 To: spectrum Subject: [spectrum] Problem getting Spectrum to identify server as Virtual Host. Hi all. We are trying to get one esxi host with several vm´s on it including the vcenterserver modeled as a virtual host in the Virtual Host Manager. On the vcenterserver ( running on Windows Server 2008) we have installed the system edge agent. We have also followed the steps in the CA Spectrum Virtual Host Manager Solution, without any luck. I am able to get the vcenterserver with the system edge agent to be modelled in ca spectrum, but it never shows up in the "virtual host manager» Do I also have to model the esxi host in spectrum? Any suggestions? Best regards Jon Magnus Dullerud --- To unsubscribe from spectrum, send email to lists...@unc.edu with the body: unsubscribe spectrum david.g...@uk.logicalis.com Please be aware that Logicalis UK Ltd may monitor email traffic data and also email content for security purposes. ______________________________________________________________________ This email has been scanned by the Symantec Email Security.cloud service. For more information please visit http://www.symanteccloud.com ______________________________________________________________________ This email communication does not create or vary any contractual relationship between Logicalis and you. Internet communications are not secure and accordingly Logicalis does not accept any legal liability for the contents of this message. The contents of this email are confidential to the intended recipient at the email address to which it has been addressed. It may not be disclosed to or used by anyone other than this addressee, nor may it be copied in any way. If received in error, please contact Logicalis on the above switchboard number quoting the name of the sender and the addressee and then delete it from your system. Please note that neither Logicalis nor the sender accepts any responsibility for viruses and it is your responsibility to scan the email and attachments (if any). Please be aware that Logicalis UK Ltd may monitor email traffic data and also email content for security purposes. Logicalis UK Ltd, Registered in England and Wales No: 3732397, Registered Office: 110 Buckingham Avenue, Slough. Berkshire, SL1 4PF ______________________________________________________________________ This email has been scanned by the Symantec Email Security.cloud service. For more information please visit http://www.symanteccloud.com ______________________________________________________________________ --- To unsubscribe from spectrum, send email to lists...@unc.edu with the body: unsubscribe spectrum arch...@mail-archive.com
