Hi Robert. Thank you for the answer. Yes we have had some help from Ca support, but the issues are the that the oid´s on different models of sensor are the same, they can´t help us with that. Do you use some kind of sensors in your environment?
What we want to do is to model the sensor, poll the attributes on it and create alarms from the values on the attributes, and receive traps from it based on thresholds set on the device. /jon magnus > 2. jun. 2015 kl. 13.34 skrev [email protected]: > > Have you registered a case to CA Support about the MIB issues. They are > usually very helpful and can solve simple MIB faults quickely for you – or > point out whats wrong, so you can fix it yourself. > > /Roberth > > From: Jon Magnus Dullerud [mailto:[email protected] > <mailto:[email protected]>] > Sent: den 2 juni 2015 13:30 > To: spectrum > Subject: [spectrum] WEB Poe Temperature sensor > > Hi group. > We are currently struggling with a vendor of temperature sensors, the mib > file is «halfway», traps not defined correctly and so on, it goes on and on. > > We have modeled this bad sensor into spectrum after many man-hours of work. > We bought another from the same vendor, and found out that they had used that > same oid for this to. The model of this sensors ar Comet T0510 and Comet > P8652. > > We are now looking for another sensor vendor that supplies equipment with mib > and mibfiles without any errors, and have traps defined a proper way in the > mibfile. SnmpV3 with SHA and AES would also have been super. Web interface > with ldap options too. > > Anyone for a hint on model and vendor :-) > > Best Regards > Jon Magnus Dullerud > Nor CyDef, Cyber Services and Operations (Norwegian CyberDefence) > --To unsubscribe from spectrum, send email to [email protected] > <mailto:[email protected]> with the body: unsubscribe > [email protected] <mailto:[email protected]> --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
