Jason, the DIY caps are a real problem. You almost have to resort to at least a drop of glue to make them stay. The paper cross method only works well with the Studio-type centers, from my experience. The walls on the DIY centers are too thin.
As for distance, the official recommendation is 1mm between burr and center post when the spring is pulled out. However because of tolerances you really just have to adjust by feel. The 1mm guieline is a good starting point though. Chris --- In [email protected], "Stefan Pochmann" <[EMAIL PROTECTED]> wrote: > > --- In [email protected], "kovacic81" > <[EMAIL PROTECTED]> wrote: > > > > Final Question: What's a good ballpark guideline on how tight to > > tighten the screws? > > No idea. Depends on you. > > > i had superglued the caps on. > > BAD idea. > ------------------------ Yahoo! Groups Sponsor --------------------~--> AIDS in India: A "lurking bomb." Click and help stop AIDS now. http://us.click.yahoo.com/VpTY2A/lzNLAA/yQLSAA/MXMplB/TM --------------------------------------------------------------------~-> Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/speedsolvingrubikscube/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
