--- In [email protected], "Stefan Pochmann"
<[EMAIL PROTECTED]> wrote:
>
> --- In [email protected], giraffeboy13
> <[EMAIL PROTECTED]> wrote:
> >
> > I just went to a local hardware store (I think it's called town and
> > country hardware, not sure though). I bought 8 springs total (at
> > $.60) but the catch was they are waaay longer than i needed them to
> > be, so I had to cut them down
>
> Is that 0.60 for each spring or for all of them together? And when you
> cut the springs, doesn't that leave very unflat (i.e. scratching)
> ends? Or did you find a way to get them nice flat again?
>
> Cheers!
> Stefan
>
It was 0.60 per spring so it wasn't the best deal ever (i was
desperate though! haha) and when i cut the springs i was able to bend
the pointy end so it wouldn't scratch the washers away. It certainly
isn't as clean as if i had gotten springs that we're actually cut to
the correct length by the manufacturer. Did you order your springs
online or through the mail or did you buy them at a store?
~John~
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/speedsolvingrubikscube/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
