--- In [email protected], christopher_pelley
<[EMAIL PROTECTED]> wrote:
> Basically you put it in Star/Horseshoe shapes, then rotate slightly
> while forcing an edge out. Reassembly is the same in reverse.
Not keen on that, unless you cannot get a cap off to get at the screw.
With a tight puzzle, popping an edge in that way pushes apart the 2
halves of the middle slice: the strain can loosen the screw, so you end
up taking the cap off anyway. It's happened to me twice.
Apart from that, it can be helpful to tweak the spring tension. :)
Mike
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/speedsolvingrubikscube/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
