-
For Petrus Solves, I figure out the 2x2 (which I think is easier that the cross). I decide which corner I am going to use for the 3x2x2 ahead of time. As I do the 2x2 (which becomes automatic after time), I watch my CHOSEN CORNER. Then I quickly throw it in, and have 2 quick edges to insert, finishing the 3x2x2. WHAT IS A GOOD TIME FOR A 3x2x2? For Sub 20, You need to have the F2L done in 14 sec with Oriented Edges. COLL and EPLL in 6 sec? So you need to have maybe 4 sec to finish the 2 corner edge pairs(2 sec per pair). SO that leaves us with 10 sec for 3x2x2 with oriented edges. I think 6 sec is a good goal for a 3x2x2. Any Thoughts? Jason K -- In [email protected], Chris Hunt <[EMAIL PROTECTED]> wrote: > > Your goal is to be able to do the block 'blindfolded' after the inspection > time is complete. > > -Chris > > On 1/20/06, Chris Hunt <[EMAIL PROTECTED]> wrote: > > > > For Petrus, try to memorize how you are going to solve the first 2x2x2 > > block during inspection. Take as much time as you need, and eventually, you > > will be able to easily plan the block in 15 seconds. > > > > -Chris > > > > On 1/20/06, jacben13 <[EMAIL PROTECTED]> wrote: > > > > > > I have just been wondering what would be the best way to my inpsection > > > faster. I use the petrus method, I first look for corner edge pairs, > > > then for either the 3rd and 4th piece or a edge on the right face. > > > But this takes me longer than 15 seconds. Would it better for me to > > > take whatever time I needed for inspection? Or should I just the 15 > > > seconds and just try to get all the inspection I need? > > > > > > Ben > > > > > > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/speedsolvingrubikscube/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
