Hi, I am the lucky new owner of a couple original 1981 cubes in
apparent mint condition. From reading around I understand they could
make a good speedcubes..
I'm surprised by this since they are really stiff. Do I need to
consider replacing any parts (eg. the kernel) or is it just the case
that it needs many hours working in and lubing. I'd rather not replace
anything unless I have to to keep it original but if I had to then
where should I go to get replacement parts for this type of cube.
Anyone had trouble removing centre caps from this age of cube? I
accidentally damaged one of the centre caps to get at the screws. It
seems that the intervening years welded the cap on somewhat. Any tips
for this.
Finally, I notice that the inside of the centre cubies are flat, not
curved like the DIY cubes are. Am I right in thinking that flat ones
are more prone to popping (hence the design change) because that
certainly seems to be the case on this cube. Having slightly loosened
the tension and lubricated the first of the cubes It still doesn't
move that easily and it pops all the time. It seems my only option is
to tighten the tension again to stop the popping but that means a
stiff cube again.
Cheers, Matt
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/speedsolvingrubikscube/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
