A Boesch wrote:
> Model=IBM-DTTA-371010, FwRev=T77OA73A, SerialNo=WL0WLFE8567
> Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
> RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=34
> BuffType=DualPortCache, BuffSize=465kB, MaxMultSect=16, MultSect=off
> CurCHS=16383/16/63, CurSects=-66060037, LBA=yes, LBAsects=19746720
> IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
> PIO modes: pio0 pio1 pio2 pio3 pio4
> DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 *mdma2 udma0 udma1 udma2
>
> [root@victory bin]# hdparm -v /dev/hda
>
> /dev/hda:
> multcount = 0 (off)
> I/O support = 3 (32-bit w/sync)
> unmaskirq = 0 (off)
> using_dma = 1 (on)
> keepsettings = 0 (off)
> nowerr = 0 (off)
> readonly = 0 (off)
> readahead = 8 (on)
> geometry = 1229/255/63, sectors = 19746720, start = 0
> [root@victory bin]#
Try with hdparm -u 1 and or -m 16 or change timeout line 254 in
modem_run.c (BLOCK1 is 991 bytes -> 5 ms). But this stuff failing every
time, IDE are not that bad.
Didier
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
