alex wrote:
> 
> This is entirely what I didn't expect. You have VPI/VCI's all over the
> place and with random settings of the PTI bits (OAM cells have the top
> bit (0x4) set).
> 
> Do you otherwise have good transfers and a steady connection? 
> 
> The VPI values I would expect are the same as the connection (VPI=0)
> with a low VCI (<32) and "in-band" OAM cells with the same VPI/VCI as
> the traffic but with PTI=0x04 (instead of 0x01 for the end of an AAL5
> frame).
> 
> Alex.

   I didn't expect such results... These cells can't be transmission 
errors because in this case it would have been a serie of random 
vpi/vci/pti cells and then an aal5 crc error caused by the transmission 
error. But there there's no crc error !!

   I will surely enable trough a command line option an atm cell header 
debug piece of code. What do you think ? (such a feature will probably 
slowdown pppoa3 speed ?)

Edouard Gomez


Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe

        

Reply via email to