Hugo Coolens wrote:

> Edouard Gomez wrote:
>
> > Hugo Coolens wrote:
> >
> > > I have a speedtouch USB-modem running under plain Mandrake8.0 (no kernel
> > > patches, just the kernel as it is in Mandrake8.0). I use
> > > speedtouch-21062001 and followed the instructions of Bernard P. except
> > > when it tells about recompiling or patching the kernel. Everything works
> > > fine, except for one thing: when I want to stop my adsl-connection
> > > I kill pppd and modem_run and then perform a halt, unfortunately my
> > > system then is uncapable of umounting cleanly my linux partition.  I
> > > asked for a solution for this problem several times but nobody seems to
> > > know how.
> >
> >    Before the halt... have you ever thought unmounting your usbdevfs
> > mount point (ususally /proc/bus/usb) ?
> >
> >
>
> when I do umount /proc/bus/usb I get a message: device is busy
>
> at this moment  my procedure to do adsl is the following:
> log in as root
> adsl.sh start
> after the message "HDLC line discipline:version 3.2, maxframe=4096 has come on my
> screen, I have to give a return to get my prompt back
> then i log in as a normal user on another console and start surfing
> after surfing and logout from the normal user console I go back to the root
> console
> I then give the commands:
> adsl.sh stop
> killall modem_run
> modprobe -r usb-uhci
> a lot of times this last command fails and the system hangs and umount fails
>
> >
> >
> >    Mandrake 8.1 will make easier the installation of the driver. BUT
> > Linux Mandrake 8.1 uses our 15082001 driver release ... It has no real
> > "better support" in the way you're thinking.
> >
>
> will the kernel and usb-support not be better?  e.g. hot plugable usb support?
>
> regards,
> hugo
>
> Liste de diffusion modem ALCATEL SpeedTouch USB
> Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
>
>


Edouard Gomez wrote:

> Hugo Coolens wrote:
>
> > I have a speedtouch USB-modem running under plain Mandrake8.0 (no kernel
> > patches, just the kernel as it is in Mandrake8.0). I use
> > speedtouch-21062001 and followed the instructions of Bernard P. except
> > when it tells about recompiling or patching the kernel. Everything works
> > fine, except for one thing: when I want to stop my adsl-connection
> > I kill pppd and modem_run and then perform a halt, unfortunately my
> > system then is uncapable of umounting cleanly my linux partition.  I
> > asked for a solution for this problem several times but nobody seems to
> > know how.
>
>    Before the halt... have you ever thought unmounting your usbdevfs
> mount point (ususally /proc/bus/usb) ?
>
>

when I do umount /proc/bus/usb I get a message: device is busy

at this moment  my procedure to do adsl is the following:
log in as root
adsl.sh start
after the message "HDLC line discipline:version 3.2, maxframe=4096 has come on my
screen, I have to give a return to get my prompt back
then i log in as a normal user on another console and start surfing
after surfing and logout from the normal user console I go back to the root
console
I then give the commands:
adsl.sh stop
killall modem_run
modprobe -r usb-uhci
a lot of times this last command fails and the system hangs and umount fails


>
>
>    Mandrake 8.1 will make easier the installation of the driver. BUT
> Linux Mandrake 8.1 uses our 15082001 driver release ... It has no real
> "better support" in the way you're thinking.
>

will the kernel and usb-support not be better?  e.g. hot plugable usb support?

regards,
hugo


Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe

        



Reply via email to