alex wrote:

> On Mon, 2001-10-01 at 10:16, Hamish Marson wrote:
> > Tim Woodall wrote:
>
> > >
> >
> > I use a VP6 with 2x PIII 866's... No overclocking... Could it be an SMP issue
> > perhaps? Back when I had no problems I was using a different machine (Aptiva E33)
> > with only a single processor onboard...
>
> Possibly but I'm not sure why it would cause the problems you talk
> about. If you have the patience you could look at a tcpdump/ethereal
> thing and see why the connection fails?
>

I've just done a check with ethereal on both my laptop (NAT'ed),  and directly from
the firewall running the pppoa2/modem_run (i.e. No NAT). Looks like the sequence
numbers are being screwed... Up until it stalls, the Next Seq - Seq for the incoming
packets match fine. Then they go out of wack... I'm trying to find an RFC that
describes the NextSeq/Seq flow (RFC 761 doesn't describe the NextSeq field in the tcp
header from a quick look). I'm trying to determine whether that's the actual problem,
or just an artifact...

Next is to dump the traffic from pppoa2 to try & determine whether the corruption is
at this end, or at BT's end...

Anyone think I"m barking up the wrong tree here? Or got a better suggestion?

H

>
>  Works fine for me btw.
>
> 85523ea7d66def4c8032d1e277777b4f  extract
> 85523ea7d66def4c8032d1e277777b4f  extract.exe
>
> But my spider-sense tells be its bound to be something else.. :-)
>
> Alex.
>
> Liste de diffusion modem ALCATEL SpeedTouch USB
> Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
>
>

--

I don't suffer from Insanity...
        I enjoy every minute of it...




Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe

        

Reply via email to