Bonjour, Pour la deuxième fois j'essaie d'installer le mdoem Speedtouch USB d'alcatel. Il y a 4 mois je n'avais réussi. Ce coup si, je vais plus loin mais.... pas jusqu'au bout.
Voici les détails : ---------------------- Ma machine : # more /proc/version Pentium MMX 200Mhz RAM : 128Mo (PC100) Carte mère FIC PA-2013 (VIA Apollo MVP3 Chipset) PC ATX Mandrake 8.1 # more /proc/version Linux version 2.4.8-26mdk ([EMAIL PROTECTED]) (gcc version 2.96 20000731 (Mandrake Linux 8.1 2.96-0.62mdk)) #1 Sun Sep 23 17:06:39 CEST 2001 <<<< Le noyau a été préparé par Mandrake lors de l'instalaltion de la distribution. J'ai simplement sélectionné l'installation du modem Speedtouch USB J'ai donc supposé que les packages sont installés et les bonnes options du noyaux ont été sélectionnées. Mandrake a décidé d'utiliser la solution "Benoit Papillaut" ! >>>> # mount /dev/hda1 on / type ext2 (rw) none on /proc type proc (rw) devfs on /dev type devfs (rw) none on /dev/pts type devpts (rw,mode=0620) none on /dev/shm type tmpfs (rw) /proc/bus/usb on /proc/bus/usb type usbdevfs (rw,devmode=0664,devgid=43) # cat /proc/bus/usb/devices T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=e000 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=06b9 ProdID=4061 Rev= 0.00 S: Manufacturer=ALCATEL S: Product=Speed Touch USB S: SerialNumber=0090D02B1EE3 C:* #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl= 50ms I: If#= 1 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#= 1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms I: If#= 1 Alt= 2 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=06(O) Atr=02(Bulk) MxPS= 32 Ivl= 0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 32 Ivl= 0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms I: If#= 1 Alt= 3 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=06(O) Atr=02(Bulk) MxPS= 16 Ivl= 0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 16 Ivl= 0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=05(O) Atr=02(Bulk) MxPS= 8 Ivl= 0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 8 Ivl= 0ms ------------------- Configuration : ------------------------- # lsmod Module Size Used by ipt_REJECT 3312 2 (autoclean) ipt_limit 1280 10 (autoclean) ipt_state 944 12 (autoclean) ipt_LOG 3776 10 ip_conntrack_ftp 3792 0 (unused) iptable_mangle 2048 0 (autoclean) (unused) iptable_nat 16560 0 (autoclean) (unused) ip_conntrack 15600 3 (autoclean) [ipt_state ip_conntrack_ftp iptable_nat] iptable_filter 2048 0 (autoclean) (unused) ip_tables 11488 9 [ipt_REJECT ipt_limit ipt_state ipt_LOG iptable_mangle iptable_nat iptable_filter] af_packet 12560 0 (autoclean) usb-uhci 21232 0 (unused) usbcore 50752 1 [usb-uhci] 3c59x 25952 1 (autoclean) rtc 5600 0 (autoclean) <<<< A partir d'ici je suis le How-to. Mandrake fournit un script qui fait le travail pour nous je l'ai aussi testé bien sur. >>>> # modprobe ppp_generic # modprobe ppp_synctty # modprobe n_hdlc # lsmod Module Size Used by n_hdlc 6288 0 (unused) ppp_synctty 5264 0 (unused) ppp_generic 19616 0 [ppp_synctty] slhc 5136 0 [ppp_generic] ipt_REJECT 3312 2 (autoclean) ipt_limit 1280 10 (autoclean) ipt_state 944 12 (autoclean) ipt_LOG 3776 10 ip_conntrack_ftp 3792 0 (unused) iptable_mangle 2048 0 (autoclean) (unused) iptable_nat 16560 0 (autoclean) (unused) ip_conntrack 15600 3 (autoclean) [ipt_state ip_conntrack_ftp iptable_nat] iptable_filter 2048 0 (autoclean) (unused) ip_tables 11488 9 [ipt_REJECT ipt_limit ipt_state ipt_LOG iptable_mangle iptable_nat iptable_filter] af_packet 12560 0 (autoclean) usb-uhci 21232 0 (unused) usbcore 50752 1 [usb-uhci] 3c59x 25952 1 (autoclean) rtc 5600 0 (autoclean) # ls /usr/share/speedtouch/ mgmt.o speedtouch.sh* # more /etc/ppp/peers/adsl noauth noipdefault pty "/usr/bin/pppoa2 -vpi 8 -vci 35" sync kdebug 1 noaccomp nopcomp noccp novj holdoff 4 maxfail 25 persist usepeerdns defaultroute user "xtemps@adsl1" pppd -v pppd: unrecognized option '-v' pppd version 2.4.1 Usage: pppd [ options ], where options are: <device> Communicate over the named device <speed> Set the baud rate to <speed> <loc>:<rem> Set the local and/or remote interface IP addresses. Either one may be omitted. asyncmap <n> Set the desired async map to hex <n> auth Require authentication from peer connect <p> Invoke shell command <p> to set up the serial line crtscts Use hardware RTS/CTS flow control defaultroute Add default route through interface file <f> Take options from file <f> modem Use modem control lines mru <n> Set MRU value to <n> for negotiation # more /etc/ppp/pap-secrets # Secrets for authentication using PAP # client server secret IP addresses 'xtemps@adsl1' * '3h5qdmk9' * # ll /usr/bin/modem_run -rwxr-xr-x 1 root root 16316 sep 6 16:37 /usr/bin/modem_run* <<<< Voici ce que disent les logs pour l'instant >>>>> # tail -f /var/log/messages Oct 21 18:06:00 corvette CROND[2744]: (root) CMD ( /usr/share/msec/promisc_check.sh) Oct 21 18:07:00 corvette CROND[2754]: (root) CMD ( /usr/share/msec/promisc_check.sh) Oct 21 18:08:00 corvette crond[946]: (*system*) RELOAD (/etc/crontab) Oct 21 19:01:00 corvette CROND[3689]: (root) CMD (run-parts /etc/cron.hourly) Oct 21 19:56:09 corvette kernel: CSLIP: code copyright 1989 Regents of the University of California Oct 21 19:56:09 corvette kernel: PPP generic driver version 2.4.1 Oct 21 19:56:26 corvette kernel: HDLC line discipline: version 3.2, maxframe=4096 Oct 21 19:56:26 corvette kernel: N_HDLC line discipline registered. Oct 21 20:01:00 corvette CROND[3720]: (root) CMD (run-parts /etc/cron.hourly) Oct 21 20:10:58 corvette pppd[3728]: unrecognized option '-v' # /usr/bin/modem_run -f /usr/share/speedtouch/mgmt.o -m <<< Logs >>> Oct 21 20:22:45 corvette kernel: usb_control/bulk_msg: timeout Oct 21 20:22:45 corvette kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x85 len 512 ret -110 Oct 21 20:22:49 corvette kernel: usb_control/bulk_msg: timeout (J'ai bien vu la LED de droite clignoter verte et rouge de temps en temps) Maintenant, si j'essaie avec le script de Mandrake et le blocage se fait au même niveau. Je rebranche alors le modem. Et voilà où j'en suis arrivé... Quel est le problème ? Quelqu'un peut-il m'aider ? Merci. Pierre. Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe