greg matthews wrote:
>Jonathan Chetwynd wrote:
>
>>the install went well, all the lights blinked properly, thanks.
>>
>>however the following does not look great, any clues, what should it look
>>like?
>>
>>[root@localhost jay]# /sbin/modprobe usb-uhci
>>[root@localhost jay]# /usr/local/bin/modem_run -m -f adsl/mgmt/mgmt.o
>>
^^^^^^^^^^^^^^^^
this is not a correct path
>>
>>[root@localhost jay]# /usr/sbin/pppd call adsl
>>[root@localhost jay]# /sbin/ifconfig ppp0
>>ppp0 Link encap:Point-to-Point Protocol
>> POINTOPOINT NOARP MULTICAST MTU:1500 Metric:1
>> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>> collisions:0 txqueuelen:3
>> RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
>>
>
>your ppp connection has not come up. there is no ip address associated
>with it. there should be a line such as:
>inet addr:a.b.c.d P-t-P:w.x.y.z Mask:255.255.255.255
>where a.b.c.d is the ip address of the client end of the link and
>w.x.y.z is the ip address of the isp end of the link. note that it may
>take upto half a minute for the ppp to come up properly. check your logs
>for errors and read the ppp stuff at www.linuxdoc.org
>
>hope this is of some help
>
>GREG
>
>
>Liste de diffusion modem ALCATEL SpeedTouch USB
>Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
>
>
>
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
