Unless pppoa is dieing on you (check syslog) then if you disconnect
after 1/2 an hour it could be your provider bouncing you.

Any pention of pppoa in the log?

Alex.


On Sat, 2002-03-09 at 18:16, Sami Dalouche wrote:
> 
> I get the exact same thing, except I can connect, but can't stay
> connected for more than an hour.. after a while, it disconnects w/ a LCP
> Timeout
> Mar  9 03:05:22 pingoo pppd[514]: LCP: timeout sending Config-Requests
> Mar  9 03:05:22 pingoo pppd[514]: Connection terminated.
> Mar  9 03:05:22 pingoo pppd[514]: Using interface ppp0
> Mar  9 03:05:22 pingoo pppd[514]: Connect: ppp0 <--> /dev/pts/4
> Mar  9 03:05:22 pingoo /etc/hotplug/net.agent: assuming ppp0 is already
> up
> Mar  9 03:05:22 pingoo /etc/hotplug/net.agent: invoke ifdown ppp0
> 
> 
> I'm using kernel 2.4.18 w/ Speedtouch-1.0
> Any idea ?
> 
> Sam
> > -----Original Message-----
> > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
> On
> > Behalf Of Jonathan Chetwynd
> > Sent: samedi 9 mars 2002 19:10
> > To: [EMAIL PROTECTED]
> > Subject: [speedtouch] driver problem?
> > 
> > 
> > I'm using speedtouch-1_0.tar.gz   from
> > http://speedtouch.sourceforge.net/download.php
> > 
> > yet when I plug the usb in I get a problem:
> > 
> > 
> > Mar  9 17:48:58 localhost su(pam_unix)[1195]: session opened for user
> root
> > by jay(uid=500)
> > Mar  9 17:53:49 localhost kernel: CSLIP: code copyright 1989 Regents
> of
> > the
> > University of California
> > Mar  9 17:53:49 localhost kernel: PPP generic driver version 2.4.1
> > Mar  9 17:54:05 localhost kernel: HDLC line discipline: version
> $Revision:
> > 3.3 $, maxframe=4096
> > Mar  9 17:54:05 localhost kernel: N_HDLC line discipline registered.
> > Mar  9 17:54:58 localhost kernel: hub.c: USB new device connect on
> bus1/1,
> > assigned device number 2
> > Mar  9 17:54:58 localhost kernel: usb-uhci.c: interrupt, status 2,
> frame#
> > 1027
> > Mar  9 17:54:58 localhost kernel: usb.c: USB device not accepting new
> > address=2
> > (error=-110)
> > Mar  9 17:54:58 localhost kernel: hub.c: USB new device connect on
> bus1/1,
> > assigned device number 3
> > Mar  9 17:54:58 localhost kernel: usb.c: USB device 3 (vend/prod
> > 0x6b9/0x4061) is not claimed by any active driver.
> > Mar  9 17:54:58 localhost /etc/hotplug/usb.agent: ... no drivers for
> USB
> > product 6b9/4061/0
> > Mar  9 17:55:17 localhost kernel: usb_control/bulk_msg: timeout
> > Mar  9 17:55:17 localhost kernel: usbdevfs: USBDEVFS_BULK failed dev 3
> ep
> > 0x85 len 512 ret -110
> > Mar  9 17:55:20 localhost kernel: usb_control/bulk_msg: timeout
> > 
> > all modules seem to load ok...
> > 
> > any ideas please
> > 
> > thanks
> > 
> > jonathan chetwynd
> > 
> > http://www.peepo.com         "The first and still the best picture
> > directory
> > on the web"
> > http://www.learningdifficulty.org.uk "Our guide to helping people with
> a
> > learning difficulty get the most from the web"
> > 
> > 
> > 
> > Liste de diffusion modem ALCATEL SpeedTouch USB
> > Pour se d�sinscrire : mailto:speedtouch-
> > [EMAIL PROTECTED]?subject=unsubscribe
> > 
> > 
> 
> 
> 
> Liste de diffusion modem ALCATEL SpeedTouch USB
> Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
> 
>       
-- 
[EMAIL PROTECTED]
http://www.bennee.com/~alex/


Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe

        

Reply via email to