Bonjour,
Je viens d'installer FreeBSD 4.5 (pour plus de securit�) et je veux bien sur mettre
mon acc�s adsl dessus mais je rencontre quelques probl�mes :
Voici les messages d'erreur que j'ai dans mon /var/log/ppp.log :
Mar 9 10:14:00 hypollite ppp[120]: Phase: Using interface: tun0
Mar 9 10:14:00 hypollite ppp[120]: Phase: deflink: Created in closed state
Mar 9 10:14:00 hypollite ppp[120]: tun0: Command: adsl: set log All -physical -timer
-sync -debug
Mar 9 10:14:00 hypollite ppp[120]: tun0: Command: adsl: set authname fti/XXXXXXX@fti
Mar 9 10:14:00 hypollite ppp[120]: tun0: Command: adsl: set authkey ********
Mar 9 10:14:00 hypollite ppp[120]: tun0: Command: adsl: set device !pppoa2 -vpi 8 -vci
35 -v 1
Mar 9 10:14:00 hypollite ppp[120]: tun0: Command: adsl: accept chap
Mar 9 10:14:00 hypollite ppp[120]: tun0: Command: adsl: set speed sync
Mar 9 10:14:00 hypollite ppp[120]: tun0: Command: adsl: set mru 1492
Mar 9 10:14:00 hypollite ppp[120]: tun0: Command: adsl: set mtu 1492
Mar 9 10:14:00 hypollite ppp[120]: tun0: Command: adsl: set timeout 0
Mar 9 10:14:00 hypollite ppp[120]: tun0: Command: adsl: enable lqr
Mar 9 10:14:00 hypollite ppp[120]: tun0: Command: adsl: set lqrperiod 5
Mar 9 10:14:00 hypollite ppp[120]: tun0: Command: adsl: set redial 15 10000
Mar 9 10:14:00 hypollite ppp[120]: tun0: Command: adsl: set dial
Mar 9 10:14:00 hypollite ppp[120]: tun0: Command: adsl: set ifaddr 10.0.0.1/0
10.0.0.2/0 255.255.255.0 0.0.0.0
Mar 9 10:14:00 hypollite ppp[120]: tun0: Command: adsl: add default HISADDR
Mar 9 10:14:00 hypollite ppp[120]: tun0: ID0: 9 = socket(17, 3, 0)
Mar 9 10:14:00 hypollite ppp[120]: tun0: ID0: -1 = write(9, data, 140)
Mar 9 10:14:00 hypollite ppp[120]: tun0: TCP/IP: rt_Set failure:
Mar 9 10:14:00 hypollite ppp[120]: tun0: TCP/IP: rt_Set: Cmd = Add
Mar 9 10:14:00 hypollite ppp[120]: tun0: TCP/IP: rt_Set: Dst = 0.0.0.0
Mar 9 10:14:00 hypollite ppp[120]: tun0: TCP/IP: rt_Set: Gateway = 10.0.0.2
Mar 9 10:14:00 hypollite ppp[120]: tun0: TCP/IP: rt_Set: Mask = 0.0.0.0
Mar 9 10:14:00 hypollite ppp[120]: tun0: Command: adsl: nat enable yes
Mar 9 10:14:00 hypollite ppp[120]: tun0: Command: adsl: enable dns
Mar 9 10:14:00 hypollite ppp[121]: tun0: ID0: 0x28249620 = fopen("/var/run/tun0.pid",
"w")
Mar 9 10:14:00 hypollite ppp[121]: tun0: Phase: PPP Started (background mode).
Mar 9 10:14:00 hypollite ppp[121]: tun0: Phase: bundle: Establish
Mar 9 10:14:00 hypollite ppp[121]: tun0: Phase: deflink: closed -> opening
Mar 9 10:14:00 hypollite ppp[121]: tun0: Phase: deflink: Connected!
Mar 9 10:14:00 hypollite ppp[121]: tun0: Phase: deflink: opening -> dial
Mar 9 10:14:00 hypollite ppp[121]: tun0: Chat: deflink: Dial attempt 1 of 10000
Mar 9 10:14:00 hypollite ppp[121]: tun0: Phase: deflink: dial -> carrier
Mar 9 10:14:00 hypollite ppp[121]: tun0: Phase: deflink: carrier -> login
Mar 9 10:14:00 hypollite ppp[121]: tun0: Phase: deflink: login -> lcp
Mar 9 10:14:00 hypollite ppp[121]: tun0: LCP: FSM: Using "deflink" as a transport
Mar 9 10:14:00 hypollite ppp[121]: tun0: LCP: deflink: State change Initial --> Closed
Mar 9 10:14:00 hypollite ppp[121]: tun0: LCP: deflink: State change Closed -->Stopped
Mar 9 10:14:01 hypollite ppp[121]: tun0: LCP: deflink: LayerStart
Mar 9 10:14:01 hypollite ppp[121]: tun0: LCP: deflink: SendConfigReq(1) state =
Stopped
Mar 9 10:14:01 hypollite ppp[121]: tun0: LCP: MRU[4] 1492
Mar 9 10:14:01 hypollite ppp[121]: tun0: LCP: MAGICNUM[6] 0x1d48bad8
Mar 9 10:14:01 hypollite ppp[121]: tun0: LCP: QUALPROTO[8] proto c025, interval 5000ms
Mar 9 10:14:01 hypollite ppp[121]: tun0: LCP: deflink: State change Stopped -->
Req-Sent
Mar 9 10:14:04 hypollite ppp[121]: tun0: LCP: deflink: SendConfigReq(1) state =
Req-Sent
Mar 9 10:14:04 hypollite ppp[121]: tun0: LCP: MRU[4] 1492
Mar 9 10:14:04 hypollite ppp[121]: tun0: LCP: MAGICNUM[6] 0x1d48bad8
Mar 9 10:14:04 hypollite ppp[121]: tun0: LCP: QUALPROTO[8] proto c025, interval 5000ms
Mar 9 10:14:07 hypollite ppp[121]: tun0: LCP: deflink: SendConfigReq(1) state =
Req-Sent
Mar 9 10:14:07 hypollite ppp[121]: tun0: LCP: MRU[4] 1492
Mar 9 10:14:07 hypollite ppp[121]: tun0: LCP: MAGICNUM[6] 0x1d48bad8
Mar 9 10:14:07 hypollite ppp[121]: tun0: LCP: QUALPROTO[8] proto c025, interval 5000ms
Mar 9 10:14:10 hypollite ppp[121]: tun0: LCP: deflink: SendConfigReq(1) state =
Req-Sent
Mar 9 10:14:10 hypollite ppp[121]: tun0: LCP: MRU[4] 1492
Mar 9 10:14:10 hypollite ppp[121]: tun0: LCP: MAGICNUM[6] 0x1d48bad8
Mar 9 10:14:10 hypollite ppp[121]: tun0: LCP: QUALPROTO[8] proto c025, interval 5000ms
Mar 9 10:14:13 hypollite ppp[121]: tun0: LCP: deflink: SendConfigReq(1) state =
Req-Sent
Mar 9 10:14:13 hypollite ppp[121]: tun0: LCP: MRU[4] 1492
Mar 9 10:14:13 hypollite ppp[121]: tun0: LCP: MAGICNUM[6] 0x1d48bad8
Mar 9 10:14:13 hypollite ppp[121]: tun0: LCP: QUALPROTO[8] proto c025, interval 5000ms
Mar 9 10:14:16 hypollite ppp[121]: tun0: LCP: deflink: LayerFinish
Mar 9 10:14:16 hypollite ppp[121]: tun0: LCP: deflink: State change Req-Sent -->
Stopped
Mar 9 10:14:16 hypollite ppp[121]: tun0: LCP: deflink: State change Stopped --> Closed
Mar 9 10:14:16 hypollite ppp[121]: tun0: LCP: deflink: State change Closed -->Initial
Mar 9 10:14:16 hypollite ppp[121]: tun0: Phase: deflink: Disconnected!
Mar 9 10:14:16 hypollite ppp[121]: tun0: Phase: deflink: lcp -> logout
Mar 9 10:14:16 hypollite ppp[121]: tun0: Phase: deflink: logout -> hangup
Mar 9 10:14:16 hypollite ppp[121]: tun0: Phase: deflink: Disconnected!
Mar 9 10:14:16 hypollite ppp[121]: tun0: Phase: deflink: Connect time: 16 secs: 0
octets in, 130 octets out
Mar 9 10:14:16 hypollite ppp[121]: tun0: Phase: deflink: : 0 packets in, 5 packets out
Mar 9 10:14:16 hypollite ppp[121]: tun0: Phase: total 8 bytes/sec, peak 10 bytes/sec
on Sat Mar 9 10:14:16 2002
Mar 9 10:14:16 hypollite ppp[121]: tun0: Phase: deflink: HUPing 123
Mar 9 10:14:16 hypollite ppp[121]: tun0: ID0: 0 = kill(123, 1)
Mar 9 10:14:16 hypollite ppp[121]: tun0: Phase: deflink: hangup -> closed
Mar 9 10:14:16 hypollite ppp[121]: tun0: ID0: 0 = socket(2, 2, 0)
Mar 9 10:14:16 hypollite ppp[121]: tun0: ID0: 0 = ioctl(0, 3223349521, 0xbfbff86c)
Mar 9 10:14:16 hypollite ppp[121]: tun0: ID0: 0 = ioctl(0, 2149607696, 0xbfbff86c)
Mar 9 10:14:16 hypollite ppp[121]: tun0: Phase: bundle: Dead
Mar 9 10:14:16 hypollite ppp[121]: tun0: ID0: 0 = ioctl(6, 2148037723, 0xbfbff954)
Mar 9 10:14:16 hypollite ppp[121]: tun0: Phase: PPP Terminated (normal).
Mar 9 10:14:16 hypollite ppp[121]: tun0: ID0: 0 = socket(2, 2, 0)
Mar 9 10:14:16 hypollite ppp[121]: tun0: ID0: 0 = ioctl(0, 3223349521, 0xbfbff94c)
Mar 9 10:14:16 hypollite ppp[121]: tun0: ID0: 0 = ioctl(0, 2149607696, 0xbfbff94c)
Mar 9 10:14:16 hypollite ppp[121]: tun0: ID0: 0 = unlink("/var/run/tun0.pid")
Mar 9 10:14:16 hypollite ppp[121]: tun0: Chat: Parent notified of failure
Mar 9 10:14:16 hypollite ppp[120]: tun0: Phase: Parent: Child failed (errdead)
Et voici ma conf /etc/ppp/ppp.conf :
set log All -physical -timer -sync -debug
set authname fti/XXXXXX@fti
set authkey XXXXXXX
set device !"pppoa2 -vpi 8 -vci 35 -v 1"
accept chap
set speed sync
set mru 1492
set mtu 1492
set timeout 0
enable lqr
set lqrperiod 5
set redial 15 10000
set dial ""
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
add default HISADDR
nat enable yes
enable dns
J'ai essay� avec et sans les lignes pour le mtu et mru et c'est pareil.
Pouvez-vous m'aider ?
Merci d'avance pour la r�ponse
Damien FONTAINE (France/Rennes)
---------------------------------
Yahoo! Mail -- Une adresse @yahoo.fr gratuite et en fran�ais !
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
