Whilst I can get my modem to work, I do not seem to be able to use the
speedtouch startup script...
Background:
Using the instructions in the SpeedTouchUSB-HOWTO I am able to initialise
the modem and connect without any problems. However when I try to run the
speedtouch script at startup it fails and I receive the messages:
"Sorry, I couldn't find your ADSL modem. Please check /proc/ ...etc... "
(In dmesg)
" usb.c: USB device 2 (vend/prod 0x6b9/0x4061) is not claimed by any
active driver
usb.c: usb_control/bulk_msg: timeout
usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x85 len 512 ret -110 "
I've followed the instructions in the How-to. I'm running Redhat Linux 7.2
with a 2.4.18 kernel. I've compiled ppp_generic, ppp_snctty and usbcore
into the kernel with n_hdlc and usb-ohci as modules. In addition I have
appended the following line to my /etc/fstab file:
none /proc/bus/usb usbdevfs defaults 0 0
I've also installed hotplug support, however I guess the problem is
coldplugging". I've searched but not found anything that helps me out.
Can someone please put me out of my misery? ;) Would appreciate
suggestions/advice.
Many thanks
Mark Jennison
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
